Problem solved. Many thanks to both Brian & Julian for getting me off the hardware fault track and returning to the configuration/setup track. I somehow got the RX Ant enabled on 6 Meters for both Main & Sub. Explains why I was able to Xmit on my yagi but unable to receive anything (since I have nothing connected to the RX Ant Input!) While I have egg on my face I also have a big smile. Sure glad it was a loose nut behind the main tuning knob and not a real hardware problem!
Thanks again for all the feedback, Frank - W6NEK ----- Original Message ----- From: "Brian Alsop" <als...@nc.rr.com> To: <elecraft@mailman.qth.net> Sent: Friday, July 17, 2009 5:12 AM Subject: Re: [Elecraft] K3 both main and sub receivers are deaf on 6 meters > In the menus check which antenna is selected. In my case for some bands > it was AUX instead of ANT1 when rig first fired up. > You have to set this by band. > > 73 de Brian/K3KO > > Julian, G4ILO wrote: > >> >>W6NEK wrote: >> >> >>>I need to clarify my opening statement. >>>The Main and Sub Receivers are both deaf on 6 meters only. >>> >>> >>> >>> >> >>A long shot - do you have the KXV3 module installed, and might you perhaps >>have accidentally switched the RX Antenna option on? This would route the >>receive signal out one BNC and back in another, and if there was nothing >>connecting them it would make the receiver pretty deaf. >> >>----- >>Julian, G4ILO. K2 #392 K3 #222. >>* G4ILO's Shack - http://www.g4ilo.com >>* KComm - http://www.g4ilo.com/kcomm.html >>* KTune - http://www.g4ilo.com/ktune.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html