I wasn't hearing the noise at all and was "maybe" barely hearing the noise w/ no antenna connected. I don't think I'd have noticed it unless someone told me to look though...
There will be no unintended results as long as you carry out the mod as intended. Good luck! I've installed (and tested) the receiver protection mod and it works a trick! Gives some very nice piece of mind for a radio that makes it out into the field every year for FD! ~Brett On Sun, 2009-08-23 at 15:40 -0400, Roy Morris wrote: > Now that my K3s have v. 3.25 firmware, I am thinking about installing the > wire mod for the automatic front-end protection. While I have access to the > PCB, why not go ahead and install the VFO tuning noise reduction mod even > though I do not experience noise during VFO rotation on 6, 10, and 60 meter > bands. You might say "if it ain't broke, don't fix it". I would like to > know if making the VFO tuning noise reduction mod could have a down side of > unintended results. Roy Morris W4WFB > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
