Sorry you are having this experience, Bill. Could you turn Verbise mode on and send me the loader dialog of the failing DSP1 load. The utility should leave the dialog open on failing loads so that you can copy the text into an email
TU Dick, K6KR Sent from my iPhone On Aug 27, 2009, at 3:38 PM, "Bill" <[email protected]> wrote: > I am getting the following failure to load the latest firmware. To > get the > load complete I tried sending only the new firmware. After several > attempts > in each of the DSP loads, the data was finally accepted. Any ideas > as to > what might be the cause... This is not the first time the > difficulty was > experience. Could a full reset and reload remove any corrupt resident > software or is that accomplished with each firmware update? > > 13:55:11 K3 Utility Version 1.2.8.10 > 13:55:11 OS Version 5.1 Build 2600 Windows XP > 13:58:56 Opening connection to ftp.elecraft.com > 13:58:56 InternetConnect completed with 12029: A connection with the > server could not be established > 13:58:56 Ready > 13:58:57 K3 MCU version 03.25. COM3 RS-232 speed 38400 bps > 13:59:02 Opening connection to ftp.elecraft.com > 13:59:04 Copying files to C:\Documents and Settings\Bill\Application > Data\Elecraft\BetaTest\k3fw3r25 > 13:59:05 Copied K3UtilityVersionInfo.txt from Elecraft > 13:59:05 Copied 1 files from Elecraft to C:\Documents and > Settings\Bill\Application Data\Elecraft\BetaTest\k3fw3r25 > 13:59:05 Ready > 13:59:05 K3 MCU version 03.25. COM3 RS-232 speed 38400 bps > 14:02:47 Opening connection to ftp.elecraft.com > 14:02:51 Cancel Button completed with error 1223: The operation was > canceled > by the user. > 14:02:51 Ready > 14:02:52 K3 MCU version 03.25. COM3 RS-232 speed 38400 bps > 14:03:15 Sending firmware file hmcu0327.hex to MCU > 14:04:24 Loaded MCU firmware version "03.27". > Radio responded with version "03.27" > 14:04:24 MCU firmware load is complete > 14:04:28 Sending firmware file hfpf0102.hex to FPF > 14:05:14 Loaded FPF firmware version "01.02". > Radio responded with version "01.02" > 14:05:14 FPF firmware load is complete > 14:05:15 Sending firmware file TBOOT7.HEX to DSP1 > 14:05:17 Sending firmware file hdsp0224.hex to DSP1 > 14:05:53 Sending firmware file DTBL0011.HEX to DSP1 > 14:07:49 Loaded DSP1 firmware version "02.24". > Radio responded with version "02.21" > 14:07:49 DSP1 firmware load failed > 17:00:51 Ready > 17:00:51 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps > 17:01:08 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps > 17:01:40 Sending firmware file hmcu0327.hex to MCU > 17:02:49 Loaded MCU firmware version "03.27". > Radio responded with version "03.27" > 17:02:49 MCU firmware load is complete > 17:02:53 Sending firmware file hfpf0102.hex to FPF > 17:03:39 Loaded FPF firmware version "01.02". > Radio responded with version "01.02" > 17:03:39 FPF firmware load is complete > 17:03:40 Sending firmware file TBOOT7.HEX to DSP1 > 17:03:42 Sending firmware file hdsp0224.hex to DSP1 > 17:04:18 Sending firmware file DTBL0011.HEX to DSP1 > 17:06:14 Loaded DSP1 firmware version "02.24". > Radio responded with version "02.21" > 17:06:14 DSP1 firmware load failed > 17:08:08 Ready > 17:08:08 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps > 17:09:54 K3 Utility Version 1.2.8.10 > 17:09:54 OS Version 5.1 Build 2600 Windows XP > 17:09:54 Serial Port COM3 is open > 17:09:54 Polling K3 > 17:09:55 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps > 17:10:27 Sending firmware file hmcu0327.hex to MCU > 17:11:35 Loaded MCU firmware version "03.27". > Radio responded with version "03.27" > 17:11:35 MCU firmware load is complete > 17:11:39 Sending firmware file hfpf0102.hex to FPF > 17:12:25 Loaded FPF firmware version "01.02". > Radio responded with version "01.02" > 17:12:25 FPF firmware load is complete > 17:12:26 Sending firmware file TBOOT7.HEX to DSP1 > 17:12:28 Sending firmware file hdsp0224.hex to DSP1 > 17:13:05 Sending firmware file DTBL0011.HEX to DSP1 > 17:15:01 Loaded DSP1 firmware version "02.24". > Radio responded with version "02.21" > 17:15:01 DSP1 firmware load failed > 17:15:15 Ready > 17:15:15 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps > 17:15:28 Sending firmware file TBOOT7.HEX to DSP1 > 17:15:30 Sending firmware file hdsp0224.hex to DSP1 > 17:16:06 Sending firmware file DTBL0011.HEX to DSP1 > 17:18:02 Loaded DSP1 firmware version "02.24". > Radio responded with version "02.24" > 17:18:02 DSP1 firmware load is complete > 17:18:03 Sending firmware file TBOOT7.HEX to DSP2 > 17:18:05 Sending firmware file haux0224.hex to DSP2 > 17:18:41 Sending firmware file DTBL0011.HEX to DSP2 > 17:20:37 Loaded DSP2 firmware version "02.24". > Radio responded with version "02.21" > 17:20:37 DSP2 firmware load failed > 17:29:55 Ready > 17:29:55 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps > 17:30:14 Sending firmware file TBOOT7.HEX to DSP2 > 17:30:16 Sending firmware file haux0224.hex to DSP2 > 17:30:51 Sending firmware file DTBL0011.HEX to DSP2 > 17:32:49 Loaded DSP2 firmware version "02.24". > Radio responded with version "02.24" > 17:32:49 DSP2 firmware load is complete > 17:32:49 Ready > 17:32:49 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps > > 73, > > Bill > K9YEQ > K2 #35; KX1 #35; K3 #1744; mini mods > ATS-3B > > > > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
