I am getting the following failure to load the latest firmware. To get the load complete I tried sending only the new firmware. After several attempts in each of the DSP loads, the data was finally accepted. Any ideas as to what might be the cause... This is not the first time the difficulty was experience. Could a full reset and reload remove any corrupt resident software or is that accomplished with each firmware update?
13:55:11 K3 Utility Version 1.2.8.10 13:55:11 OS Version 5.1 Build 2600 Windows XP 13:58:56 Opening connection to ftp.elecraft.com 13:58:56 InternetConnect completed with error 12029: A connection with the server could not be established 13:58:56 Ready 13:58:57 K3 MCU version 03.25. COM3 RS-232 speed 38400 bps 13:59:02 Opening connection to ftp.elecraft.com 13:59:04 Copying files to C:\Documents and Settings\Bill\Application Data\Elecraft\BetaTest\k3fw3r25 13:59:05 Copied K3UtilityVersionInfo.txt from Elecraft 13:59:05 Copied 1 files from Elecraft to C:\Documents and Settings\Bill\Application Data\Elecraft\BetaTest\k3fw3r25 13:59:05 Ready 13:59:05 K3 MCU version 03.25. COM3 RS-232 speed 38400 bps 14:02:47 Opening connection to ftp.elecraft.com 14:02:51 Cancel Button completed with error 1223: The operation was canceled by the user. 14:02:51 Ready 14:02:52 K3 MCU version 03.25. COM3 RS-232 speed 38400 bps 14:03:15 Sending firmware file hmcu0327.hex to MCU 14:04:24 Loaded MCU firmware version "03.27". Radio responded with version "03.27" 14:04:24 MCU firmware load is complete 14:04:28 Sending firmware file hfpf0102.hex to FPF 14:05:14 Loaded FPF firmware version "01.02". Radio responded with version "01.02" 14:05:14 FPF firmware load is complete 14:05:15 Sending firmware file TBOOT7.HEX to DSP1 14:05:17 Sending firmware file hdsp0224.hex to DSP1 14:05:53 Sending firmware file DTBL0011.HEX to DSP1 14:07:49 Loaded DSP1 firmware version "02.24". Radio responded with version "02.21" 14:07:49 DSP1 firmware load failed 17:00:51 Ready 17:00:51 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps 17:01:08 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps 17:01:40 Sending firmware file hmcu0327.hex to MCU 17:02:49 Loaded MCU firmware version "03.27". Radio responded with version "03.27" 17:02:49 MCU firmware load is complete 17:02:53 Sending firmware file hfpf0102.hex to FPF 17:03:39 Loaded FPF firmware version "01.02". Radio responded with version "01.02" 17:03:39 FPF firmware load is complete 17:03:40 Sending firmware file TBOOT7.HEX to DSP1 17:03:42 Sending firmware file hdsp0224.hex to DSP1 17:04:18 Sending firmware file DTBL0011.HEX to DSP1 17:06:14 Loaded DSP1 firmware version "02.24". Radio responded with version "02.21" 17:06:14 DSP1 firmware load failed 17:08:08 Ready 17:08:08 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps 17:09:54 K3 Utility Version 1.2.8.10 17:09:54 OS Version 5.1 Build 2600 Windows XP 17:09:54 Serial Port COM3 is open 17:09:54 Polling K3 17:09:55 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps 17:10:27 Sending firmware file hmcu0327.hex to MCU 17:11:35 Loaded MCU firmware version "03.27". Radio responded with version "03.27" 17:11:35 MCU firmware load is complete 17:11:39 Sending firmware file hfpf0102.hex to FPF 17:12:25 Loaded FPF firmware version "01.02". Radio responded with version "01.02" 17:12:25 FPF firmware load is complete 17:12:26 Sending firmware file TBOOT7.HEX to DSP1 17:12:28 Sending firmware file hdsp0224.hex to DSP1 17:13:05 Sending firmware file DTBL0011.HEX to DSP1 17:15:01 Loaded DSP1 firmware version "02.24". Radio responded with version "02.21" 17:15:01 DSP1 firmware load failed 17:15:15 Ready 17:15:15 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps 17:15:28 Sending firmware file TBOOT7.HEX to DSP1 17:15:30 Sending firmware file hdsp0224.hex to DSP1 17:16:06 Sending firmware file DTBL0011.HEX to DSP1 17:18:02 Loaded DSP1 firmware version "02.24". Radio responded with version "02.24" 17:18:02 DSP1 firmware load is complete 17:18:03 Sending firmware file TBOOT7.HEX to DSP2 17:18:05 Sending firmware file haux0224.hex to DSP2 17:18:41 Sending firmware file DTBL0011.HEX to DSP2 17:20:37 Loaded DSP2 firmware version "02.24". Radio responded with version "02.21" 17:20:37 DSP2 firmware load failed 17:29:55 Ready 17:29:55 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps 17:30:14 Sending firmware file TBOOT7.HEX to DSP2 17:30:16 Sending firmware file haux0224.hex to DSP2 17:30:51 Sending firmware file DTBL0011.HEX to DSP2 17:32:49 Loaded DSP2 firmware version "02.24". Radio responded with version "02.24" 17:32:49 DSP2 firmware load is complete 17:32:49 Ready 17:32:49 K3 MCU version 03.27. COM3 RS-232 speed 38400 bps 73, Bill K9YEQ K2 #35; KX1 #35; K3 #1744; mini mods ATS-3B ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
