It says things on the website that lead me to believe this: Note that some of the upgrade Rev D DSPs may have their assembly revision level marked by hand, and its possible a few not have been marked with new Rev D, but if the LPF piggyback board is added on those DSP boards, or if they have the Rev D assembly marking, they are Rev D.
I have a rev B board that I've added the LPF board onto and I've also done the 100uF C9/C13 mods... I just don't want to be putting in pretty much the same board when mine arrives. ~Brett (KC7OTG) On Sat, 2010-01-02 at 18:15 -0600, Bob Naumann wrote: > Who said they "might even be reworked boards"? > > On what do you base this claim? > > > -----Original Message----- > From: Brett Howard [mailto:[email protected]] > Sent: Saturday, January 02, 2010 4:53 PM > To: Bob Naumann > Cc: [email protected]; [email protected] > Subject: RE: [Elecraft] DIY DSP Rev D > > See its not angst... Some of us like to open the radio up and melt a > little solder inside. I've alredy done most of the mods I believe to > bring my board up to Rev. D. I've already placed an order for a Rev. D > board but if the mods aren't much more than what I've already done I'd > rather bring it up to snuff myself. > > >From what I've read the Rev. D boards might even be reworked boards > anyway... If they're not complete production boards and they are > shipping a reworked board then I'd much rather just be able to do it > myself so that I know what the differences are from the schematics that > the radio shipped with. > > ~Brett (KC7OTG) > > On Sat, 2010-01-02 at 07:29 -0600, Bob Naumann wrote: > > By the > > time you extract the old DSP board and begin making mods to it (that > > you > > might screw up) you could have installed the new one and had the radio > > back > > on the air. I fail to understand the angst being expressed here about > > all of > > this. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
