Good afternoon. I run my K3 on and off with TRX Manager. This is great software and works very well. Last week whilst working on 80m (500W) I had some RF feedback which locked up the PC. Quick re-start and all was working again with TRX Manager. Then I noticed that the frontpanel of the K3 did not work anymore. That is all pushbuttons did not respond, or responded a different function. The rotary controls are OK (except the pushbuttons behind them). With the PC disconnected, I tried a re-start, re-loaded the firmware, and parameter initialization (page 55 manual) but none of them restored the frontpanel operation.
Again the K3 works fine when connected with TRX Manager, but fail to respond to the frontpanel controls. Has anybody have had a similar experience, and if so what should I do to restore the normal working. Any suggestion is welcome. Thanks and 73, Nick PA0NCV ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
