Yuma, Only thru TRX Manager can I get into SW TEST (as also my menu/config button does not work)
AS the Shift/Lo and Hi/Width don't work either I cannot perform the Scn Adc function. Thanks for the suggestion Regards Nick ----- Original Message ----- From: "Dave Hachadorian" <[email protected]> To: "Nick Verbeek" <[email protected]> Sent: Monday, March 01, 2010 1:00 AM Subject: Re: [Elecraft] K3 Front panel not working > Nick, > > I have six switches on my front panel that suddenly stopped working. I'm > waiting for a break in the contest season to send the rig in for repair. > > Here is some correspondence from Elecraft on that: > ------------ > Go into the SW TEST menu and set it to Scn Adc. Then see if pressing the > Shift/Lo knob returns 2 040, in a similar way that pressing the Hi/Width > knob shows 3 040. Exit the Scn Adc test using the VFO A knob. > > Problems with the front panel knobs or encoders, usually require > replacement or repair of the front panel. > ------------- > > Shift/Lo is one of the buttons that does not work on my rig. > > Good luck. > > > Dave Hachadorian, K6LL > Yuma, AZ > > > > > > > > > -------------------------------------------------- > From: "Nick Verbeek" <[email protected]> > Sent: Sunday, February 28, 2010 4:43 PM > To: "Laurent F6DEX" <[email protected]>; <[email protected]> > Subject: Re: [Elecraft] K3 Front panel not working > >> Yes I tried that as well laurent. >> Power supply removed for few minutes and than holding power switch in for >> 10 >> sec, which forces the the firmware download. >> No change unfortunately >> >> Thanks for the suggestion >> >> Nick >> >> >> ----- Original Message ----- >> From: "Laurent F6DEX" <[email protected]> >> To: <[email protected]> >> Sent: Sunday, February 28, 2010 10:16 PM >> Subject: Re: [Elecraft] K3 Front panel not working >> >> >>> >>> Nick, >>> >>> Did you try removing power supply completly ? Or do a reset/reload the >>> firmware after you remove power supply. >>> >>> Laurent >>> -- >>> View this message in context: >>> http://n2.nabble.com/K3-Front-panel-not-working-tp4649564p4651007.html >>> Sent from the Elecraft mailing list archive at Nabble.com. >>> ______________________________________________________________ >>> Elecraft mailing list >>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >>> Help: http://mailman.qth.net/mmfaq.htm >>> Post: mailto:[email protected] >>> >>> This list hosted by: http://www.qsl.net >>> Please help support this email list: http://www.qsl.net/donate.html >>> >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
