This weekend I used my K-3 on RTTY for the first time. Using the K-3's AFSK-A mode along with N1MM & MMTTY. I quickly noticed that I was off frequency by differing amounts on each band and seldom would anyone come back to me when I called them. So I called CQ myself and waited for people to call me and then went tuning to see what freq. they were on. To tune callers in on 20-meters it usually required an RIT setting of +0.10 while on 40-meters they usually called in with RIT at -0.10 ... seemed to be a little different on each band. Question: Is there a way prior to operating, to setup the K-3 so the transmitted RTTY is on freq. on each band? By the way, when I did get the K-3 on frequency is worked greatll! Thanks & 73, Dick- K9OM N1MM shows PSK mode on top of the logging window when the K3 > is in Data A mode but seems to transmit RTTY OK.
Depends on what you have set in the "Mode Control" tab of the N1MM Logger configuration dialog. I generally set RTTY to RTTY for FSK and set PSK to PSK (DATA A) for PSK. If you want to use AFSK for RTTY, I would set RTTY to AFSK and use AFSK A as the data mode in the K3. The only way the data mode matters to N1MM Logger is what it records in the log. If you set N1MM to record contest mode, it won't care what the radio mode is. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
