Hi Dick,
Did you set the correct filter shift freqency in menu? I guess you use
2.7KHz SSB filter
during RTTY transmit.
73 de ba4rf,David
2010/3/1 <[email protected]>
> This weekend I used my K-3 on RTTY for the first time. Using the K-3's
> AFSK-A mode along with N1MM & MMTTY.
>
> I quickly noticed that I was off frequency by differing amounts on each
> band and seldom would anyone come back to me when I called them. So I
> called
> CQ myself and waited for people to call me and then went tuning to see
> what freq. they were on. To tune callers in on 20-meters it usually
> required
> an RIT setting of +0.10 while on 40-meters they usually called in with RIT
> at -0.10 ... seemed to be a little different on each band.
>
> Question: Is there a way prior to operating, to setup the K-3 so the
> transmitted RTTY is on freq. on each band?
>
> By the way, when I did get the K-3 on frequency is worked greatll!
>
> Thanks & 73,
>
> Dick- K9OM
>
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[email protected]
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
