Normally I dont need the DPB. But when in RUN-CQ mode with QRM in the last NAQP I was very happy to have it.
73 Claude Du Berger VE2FK [email protected] http://www.contestgroupduquebec.com/ http://sites.google.com/site/va2upcontesting/Home ----- Original Message ----- From: Dave Hachadorian To: [email protected] ; Elecraft Reflector Sent: Monday, March 01, 2010 5:32 PM Subject: Re: [Elecraft] K3 - A different RTTY question I have tried using the dual passband filter in FSK, and it doesn't seem to copy any better than the flat DSP filter with 250 Hz roofer. I also can hear that slight ringing on the mark and space frequency in the headphones with DPB. The ringing makes it a little hard to tell in the headphones if a really weak station is calling. I use the regular flat DSP filter now. Dave Hachadorian, K6LL Yuma, AZ -------------------------------------------------- From: "Mike" <[email protected]> Sent: Monday, March 01, 2010 2:42 PM To: <[email protected]> Subject: Re: [Elecraft] K3 - A different RTTY question > I've found I copy much better without using dual passband. I > have the > 400Hz 8-pole filter. I'm using AFSK-A. I use MMTTY. > With DPB on, even the noise sounds a bit like a RTTY signal, > and the > MMTTY shows 2 little peaks on the FFT display. > Do I have a configuration problem, or is that normal? > > 73, Mike NF4L ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
