Hector, My apologies for being redundant ... Same question to you, Joe and Merv ..
You have to specify which rev level boards you're talking about. The "B" rev board was the board before any changes were made. The "C" board has the LF response improvements. The "D" board is a "C" board with the LPF. If we're not specific, none of the comments make sense. Let me be specific in my question. If I add the LPF daughter board to the "C" level DSP board, are there ADDITIONAL changes that were made to get to the factory "D" level board or not, beyond what is already in the "C" board? Maybe Elecraft would chime in on this just for clarification. Thanks ... Grant/NQ5T On Mar 8, 2010, at 12:48 PM, Hector Padron wrote: > Grant the extra low pass filter board is what it is,to cut down the "highs" > but the low end mod is something totally different,its a change of components > to lower the RX and TX roll off down to 50Hz.Some users say they don't like > it and leave their radios the way it came from factory,.some others like me > like to hear the lows and we did the swap of the whole board. > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
