Which rev level boards are you all talking about. The "B" board (pre-LF mods), the "C" board which supposedly has these LF mods installed, or the "D" board which was advertised as being the same as the "C"-level board with the factory addition of the LPF.
I thought the only difference between the "C" board and the "D" board was the LPF module. None of this means anything without specifying the rev levels. Grant/NQ5T On Mar 8, 2010, at 12:06 PM, Merv Schweigert wrote: > Yep, they have changed a number of components on the board itself, > resistors and caps, mostly for better low freq response, > Someplace I had seen there were something like 14 changes in parts. > But I may be mistaken on that number count. > 73 Merv KH7C >> >> ??? Are you saying that Elecraft makes additional changes on the "C" board >> that are not part of the LPF addition? >> >> Grant/NQ5T >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[email protected] >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> >> > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
