Hi James, I used an Exacto knife to cut the traces on mine. They're pretty thin lines, so it doesn't take much to cut through them.
Do note that the LPF mod does NOT give you the extended low frequency response on TX and RX that you would get with the board exchange. If that's not important to you, then the DIY option is a good way to go. Someone recently mentioned that Elecraft offered to modify his DSP board if he sent it in and that the turn-around time was just a few days. Don't know if that's something they're generally offering or if it was a one-time-only deal for him. The downside is you're without your K3 for the time it takes to get the modified board back to you. 73 -- Joe KB8AP On Mar 8, 2010, at 7:47 AM, K2QI wrote: > Just saw that Elecraft is now offering a DIY kit to upgrade your > current DSP > board with the LPF module. > ... > I'm curious as to how you guys > that have done this mod have gone about cutting the two traces? > Would an > exacto knife work? > > 73 de James K2QI ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
