Here's a posting from March on using the KDVR with N1MM. I've used the macros in DXLab Commander successfully using the suggested syntax.
Jim N7US -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Iain MacDonnell - N6ML Sent: March 07, 2010 21:09 To: [email protected] Subject: Re: [N1MM] N1MM and K-3 Configuration for keying KDVR3 with F key strings I used CATA1ASC and CATA2ASC for a possible SO2R solution that I've never really tested fully. CATA1ASC should have the same effect as CAT1ASC in a SO1V-type scenario. Some notes at http://www.dseven.org/ar/n1mm-kdvr3 ~Iain / N6ML On Sun, Mar 7, 2010 at 11:28 AM, Steve London <[email protected]> wrote: > > > The correct command is CAT1ASC, not CATA1ASC . > > 73, > Steve, N2IC > > > Jim McCook wrote: > > Last year N6ML came up with a great scheme for using 4 function keys on > the keyboard with N1MM to key the K-3's KDVR3 on SSB. I used it afterward in > the CQWW SSB contest, and it worked flawlessly. Now, for some reason, it > won't work in this ARRL SSB DX contest. The entry in N1MM for those keys had > been memorized in N1MM for SSB: > > > > *F1 CQ,{CATA1ASC K31;SWT21;} > > > > *F2 Exch,{CATA1ASC K31;SWT31;} > > > > *F3 Thanks!,{CATA1ASC K31;SWT35;} > > > > *F4 {MYCALL},{CATA1ASC K31;SWT39;} > > > > > > I can't understand why they won't work now, when they did before. I can > punch the M1-M4 buttons on the K-3 and they work fine. I've tried all the > settings I can imagine in both N1MM and PTT-key in the K-3. > > > > If you are using this scheme, please tell me your magic combination of > settings in N1MM and K-3 Config PTT-KEY > > > > Jim > > W6YA > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
