I would like to be able to calibrate it according the manual and Method 3 73 de M0XDF -- Sometimes I wonder whether the world is being run by smart people who are putting us on or by imbeciles who really mean it. -Mark Twain, author and humorist (1835-1910)
On 17 Jun 2010, at 19:37, Brett Howard wrote: > So you bought the TCXO because you wanted to be able to say that it > was further temperature compensated by firmware? Because what was > promised was that it would get to 0.5PPM via additional firmware > correction. Well it turns out that the oscillators already do that > out of the box. Thus implementing even further enhancement got moved > very low on the list because people were already receiving that which > they were promised. > > At the moment there are MANY things that the P3 will be able to do > that are yet to be promised. You can easily tell by looking at the > back of one at a hamfest. There is a VGA connector port, a USB > Keyboard port, and a port to accept a W2 sensor... Think of all the > possibilities that can come from this. > > Not to mention.. Think of all the features that have come to the K3 > that weren't promised! I'd hope that you purchased the TCXO so that > you could have 0.5PPM rather than 5PPM accuracy on your reference You > can be comforted if that is the case as you are actually getting > exactly what you paid for. > > ~Brett (N7MG) ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
