You can input the information via the K3 utility. It is then stored in the radio...
~Brett On Jun 17, 2010 1:16 PM, "David Ferrington, M0XDF" <[email protected]> wrote: > I would like to be able to calibrate it according the manual and Method 3 > 73 de M0XDF > -- > Sometimes I wonder whether the world is being run by smart people who are > putting us on or by imbeciles who really mean it. > -Mark Twain, author and humorist (1835-1910) > > On 17 Jun 2010, at 19:37, Brett Howard wrote: > >> So you bought the TCXO because you wanted to be able to say that it >> was further temperature compensated by firmware? Because what was >> promised was that it would get to 0.5PPM via additional firmware >> correction. Well it turns out that the oscillators already do that >> out of the box. Thus implementing even further enhancement got moved >> very low on the list because people were already receiving that which >> they were promised. >> >> At the moment there are MANY things that the P3 will be able to do >> that are yet to be promised. You can easily tell by looking at the >> back of one at a hamfest. There is a VGA connector port, a USB >> Keyboard port, and a port to accept a W2 sensor... Think of all the >> possibilities that can come from this. >> >> Not to mention.. Think of all the features that have come to the K3 >> that weren't promised! I'd hope that you purchased the TCXO so that >> you could have 0.5PPM rather than 5PPM accuracy on your reference You >> can be comforted if that is the case as you are actually getting >> exactly what you paid for. >> >> ~Brett (N7MG) > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
