Been using my K3 number 4359 on CW for almost a month - very happy. Last night I hooked up my SignaLink USB and tried PSK31. Got a waterfall display, signals present and being decoded, but NO output when CocoaModem set to transmit. Figured I had something hosed in the SL jumpers - checked three times, they are OK. So, hooked up my Elecraft MH2 Mic and thought I'd give SSB a try this afternoon. NO OUTPUT!
I have the K3 set on 14.200 (dummy load), RF power at 40w, Mic Sel = FP.L, Mic + Lin = OFF. I press the PTT button on the mic, I get the red TX light on the K3, the radio appears to go into transmit mode, but no inkling of RF when I speak into the mic. I have the Mic control at 23, CMP = 0, Mon = 53. So, what have I forgotten to set? I'm betting that whatever is hosed with the SSB setting may fix my PSK31 problem, too. Anyone have any suggestions? Tnx, Jim / W6JHB -- View this message in context: http://elecraft.365791.n2.nabble.com/K3-SSB-Data-No-Output-Need-suggestions-tp5278730p5278730.html Sent from the Elecraft mailing list archive at Nabble.com. ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
