Gene, Did you supply power to the KAT100 (note, no dash in the model number for Elecraft products). You must supply power to the coaxial 2.1 mm jack on the rear panel prior to the time you power on the K2.
73, Don W3FPR Eugene Balinski wrote: > All, > > I recently picked up a used KAT-100 to use with my > K2/100. The KAT-100 appears to be DOA. No LED's light up. > > > Before I email the previous owner, are there any special > settings on the K2/100 that I need to be sure are correctly > set ? I have buzzed out the control cable (it is correct > per the schematic). The KIO2 is installed. > > Any suggestions for troubleshooting would be > appreciated. > > Thanks es > > Gene K1NR > --------------------------------------------------------------------- > Web mail provided by NuNet, Inc. The Premier National provider. > http://www.nni.com/ > ______________________________________________________________ > Elecraft mailing list > Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[email protected] > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:[email protected] This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
