Hi, On Mon, Jul 21, 2008 at 10:12 PM, Stefan <[EMAIL PROTECTED]> wrote: > Hello everyone! > > I try to install the driver under opensuse 10.3 and 11.0. Both systems are > installed fresh and the failure comes also with all updates installed. > When i plug in the device the driver look like loaded OK the dmesg: > > ------------------------------------------------------------------------------------ > > > usb 6-1: new high speed USB device using ehci_hcd and address 2 > usb 6-1: configuration #1 chosen from 1 choice > usb 6-1: New USB device found, idVendor=0ccd, idProduct=0072 > usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2 > usb 6-1: Product: Cinergy Hybrid T USB XS FM > usb 6-1: SerialNumber: 080102004516 > Linux video capture interface: v2.00 > em28xx v4l2 driver version 0.0.1 loaded > em28xx new video device (0ccd:0072): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > device has gpio reset values stored on board > cx25843.c: starting probe for adapter SMBus I801 adapter at 1c20 (0x40004) > cx25843.c: detecting cx25843 client on address 0x88 > input: em2880/em2870 remote control as /devices/virtual/input/input7 > em28xx-input.c: remote control handler attached > cx25843.c: starting probe for adapter em28xx #0 (0x1001f) > cx25843.c: detecting cx25843 client on address 0x88 > attach_inform: msp34xx/cx25843 detected. > trying to attach xc5000 > attaching xc5000 tuner module > successfully attached tuner > radio device registered as /dev/radio0 > em28xx #0: AC97 command still being executed: not handled properly! > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > em28xx #0: V4L2 device registered as /dev/video0 > em28xx #0: Found Terratec Hybrid XS FM (em2883) > usbcore: registered new interface driver em28xx > radio open() > modelock active! > vbi open() > modelock active! > analog tv open() > modelock active! > tuner' 1-0061: chip found @ 0xc2 (em28xx #0) > attach inform (default): detected I2C address c2 > em28xx-audio.c: probing for em28x1 non standard usbaudio > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > Em28xx: Initialized (Em28xx Audio Extension) extension > em2880-dvb.c: DVB Init > DVB: registering new adapter (em2880 DVB-T) > DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... > Em28xx: Initialized (Em2880 DVB Extension) extension >
where did you download this driver? must be some prehistoric version I guess.. Markus > ----------------------------------------------------------------------------------------------------- > > at next when i start the dvb section in kaffeine nothing will happend and the > commandline from kaffeine and the dmesg tells me following: > > ----------------------------------------------------------------------------------------------------- > > [EMAIL PROTECTED]:~> kaffeine > /dev/dvb/adapter0/frontend0 : opened ( Zarlink ZL10353 DVB-T ) > 0 EPG plugins loaded for device 0:0. > Loaded epg data : 4134 events (56 msecs) > [EMAIL PROTECTED]:~> Tuning to: RTL2 / autocount: 0 > DvbCam::probe(): /dev/dvb/adapter0/ca0: : Datei oder Verzeichnis nicht > gefunden > Using DVB device 0:0 "Zarlink ZL10353 DVB-T" > tuning DVB-T to 538000000 Hz > inv:2 bw:0 fecH:2 fecL:9 mod:1 tm:1 gi:3 hier:0 > ...... > > Not able to lock to the signal on the given frequency > Frontend closed > Tuning delay: 1139 ms > > dmesg: > SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=172.16.54.1 DST=224.0.0.251 > LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 > SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=192.168.23.1 DST=224.0.0.251 > LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 > SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= SRC=192.168.2.104 DST=224.0.0.251 > LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 > initializing: 18 > powered down zl10353 > initializing: 18 > FIXME:em28xx_i2c_send_bytes(c2): write failed: > =============================== > 00 00 00 00 > ================================ > FIXME:em28xx_i2c_send_bytes(c2): write failed: > =============================== > 00 01 80 0b > ================================ > FIXME:em28xx_i2c_send_bytes(c2): write failed: > =============================== > 00 02 00 c0 > ================================ > FIXME:em28xx_i2c_send_bytes(c2): write failed: > =============================== > 00 05 12 3d > ================================ > FIXME:em28xx_i2c_send_bytes(c2): write failed: > =============================== > 00 03 85 d0 > ================================ > FIXME:em28xx_i2c_send_bytes(c2): write failed: > =============================== > 00 0a 00 00 > ================================ > powered down zl10353 > > ------------------------------------------------------------------------------------ > > With the application running i must unplug/plugin the device and then is > everthing is OK. I can change channels and watch TV until i stop the TV > watching. Next attempt same problem and i have done the same procedure. > > -------------------------------------------------------------------------------------- > kaffeine after plug out/in without closing program > > Tuning to: RTL2 / autocount: 0 > Using DVB device 0:0 "Zarlink ZL10353 DVB-T" > tuning DVB-T to 538000000 Hz > inv:2 bw:0 fecH:2 fecL:9 mod:1 tm:1 gi:3 hier:0 > ... LOCKED. > NOUT: 1 > dvbEvents 0:0 started > Tuning delay: 781 ms > pipe opened > xine pipe opened /home/sfi/.kaxtv.ts > > ---------------------------------------------------------------------------------------------------- > > > The problem still exists also with other programs eg. mplayer, xine ore the > scan tool for a channel.conf. and as root logged in. > I hope anyone has a solution for this problem and can help me! > > -Stefan > > > > > > > > _______________________________________________ > Em28xx mailing list > [email protected] > http://mcentral.de/mailman/listinfo/em28xx > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
