Hi Markus I download the driver from http://mcentral.de/hg/~mrec/em28xx-new acc. http://mcentral.de/wiki/index.php5/Installation_Guide.
---------------------------------------------------------------------------------------------- [EMAIL PROTECTED]:~/em28xx-new> ./build.sh build rm -rf Module.symvers; make -C /lib/modules/`if [ -d /lib/modules/2.6.21.4-eeepc ]; then echo 2.6.21.4-eeepc; else uname -r; fi`/build SUBDIRS=`pwd` modules make[1]: Entering directory `/usr/src/linux-2.6.25.9-0.2-obj/x86_64/default' make -C /usr/src/linux-2.6.25.9-0.2 O=/usr/src/linux-2.6.25.9-0.2-obj/x86_64/default/. modules CC [M] /home/sfi/em28xx-new/em2880-dvb.o /home/sfi/em28xx-new/em2880-dvb.c: In function ‘em28xx_zl10353_sleep’: /home/sfi/em28xx-new/em2880-dvb.c:698: warning: unused variable ‘gpio_arg’ CC [M] /home/sfi/em28xx-new/em28xx-video.o CC [M] /home/sfi/em28xx-new/em28xx-i2c.o /home/sfi/em28xx-new/em28xx-i2c.c:677: warning: ‘inc_use’ defined but not used /home/sfi/em28xx-new/em28xx-i2c.c:684: warning: ‘dec_use’ defined but not used CC [M] /home/sfi/em28xx-new/em28xx-cards.o CC [M] /home/sfi/em28xx-new/em28xx-core.o CC [M] /home/sfi/em28xx-new/em28xx-input.o CC [M] /home/sfi/em28xx-new/em28xx-webcam.o CC [M] /home/sfi/em28xx-new/em28xx-keymaps.o LD [M] /home/sfi/em28xx-new/em28xx.o CC [M] /home/sfi/em28xx-new/em28xx-audio.o LD [M] /home/sfi/em28xx-new/em28xx-dvb.o CC [M] /home/sfi/em28xx-new/cx25843/em28xx-cx25843.o CC [M] /home/sfi/em28xx-new/drx3973d/drx3973d_demod.o CC [M] /home/sfi/em28xx-new/drx3973d/drx3973d_core.o /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:6059:8: warning: "COMPILE_FOR_QT" is not defined /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:6068:7: warning: "COMPILE_FOR_QT" is not defined /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:6085:8: warning: "COMPILE_FOR_QT" is not defined /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:7726:8: warning: "COMPILE_FOR_QT" is not defined /home/sfi/em28xx-new/drx3973d/drx3973d_core.c: In function ‘DRX3973D_Open’: /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:7799: warning: enumeration value ‘DRX3973D_SPIN_UNKNOWN’ not handled in switch /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:7915:8: warning: "COMPILE_FOR_QT" is not defined /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:7927:8: warning: "COMPILE_FOR_QT" is not defined /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:7933:8: warning: "COMPILE_FOR_QT" is not defined CC [M] /home/sfi/em28xx-new/drx3973d/drx3973d_host.o CC [M] /home/sfi/em28xx-new/drx3973d/drx_dap_wasi.o CC [M] /home/sfi/em28xx-new/drx3973d/drx_driver.o CC [M] /home/sfi/em28xx-new/drx3973d/drx3973d_i2c.o LD [M] /home/sfi/em28xx-new/drx3973d/drx3973d.o CC [M] /home/sfi/em28xx-new/lgdt3304/lgdt3304.o LD [M] /home/sfi/em28xx-new/lgdt3304/lgdt3304-demod.o CC [M] /home/sfi/em28xx-new/mt2060/mt2060.o CC [M] /home/sfi/em28xx-new/qt1010/qt1010.o CC [M] /home/sfi/em28xx-new/tvp5150/tvp5150.o CC [M] /home/sfi/em28xx-new/xc3028/xc3028_control.o CC [M] /home/sfi/em28xx-new/xc3028/xc3028_module.o LD [M] /home/sfi/em28xx-new/xc3028/xc3028-tuner.o CC [M] /home/sfi/em28xx-new/xc5000/xc5000_control.o CC [M] /home/sfi/em28xx-new/xc5000/xc5000_module.o CC [M] /home/sfi/em28xx-new/xc5000/i2c_driver.o LD [M] /home/sfi/em28xx-new/xc5000/xc5000-tuner.o CC [M] /home/sfi/em28xx-new/zl10353/zl10353.o Building modules, stage 2. MODPOST 12 modules CC /home/sfi/em28xx-new/cx25843/em28xx-cx25843.mod.o LD [M] /home/sfi/em28xx-new/cx25843/em28xx-cx25843.ko CC /home/sfi/em28xx-new/drx3973d/drx3973d.mod.o LD [M] /home/sfi/em28xx-new/drx3973d/drx3973d.ko CC /home/sfi/em28xx-new/em28xx-audio.mod.o LD [M] /home/sfi/em28xx-new/em28xx-audio.ko CC /home/sfi/em28xx-new/em28xx-dvb.mod.o LD [M] /home/sfi/em28xx-new/em28xx-dvb.ko CC /home/sfi/em28xx-new/em28xx.mod.o LD [M] /home/sfi/em28xx-new/em28xx.ko CC /home/sfi/em28xx-new/lgdt3304/lgdt3304-demod.mod.o LD [M] /home/sfi/em28xx-new/lgdt3304/lgdt3304-demod.ko CC /home/sfi/em28xx-new/mt2060/mt2060.mod.o LD [M] /home/sfi/em28xx-new/mt2060/mt2060.ko CC /home/sfi/em28xx-new/qt1010/qt1010.mod.o LD [M] /home/sfi/em28xx-new/qt1010/qt1010.ko CC /home/sfi/em28xx-new/tvp5150/tvp5150.mod.o LD [M] /home/sfi/em28xx-new/tvp5150/tvp5150.ko CC /home/sfi/em28xx-new/xc3028/xc3028-tuner.mod.o LD [M] /home/sfi/em28xx-new/xc3028/xc3028-tuner.ko CC /home/sfi/em28xx-new/xc5000/xc5000-tuner.mod.o LD [M] /home/sfi/em28xx-new/xc5000/xc5000-tuner.ko CC /home/sfi/em28xx-new/zl10353/zl10353.mod.o LD [M] /home/sfi/em28xx-new/zl10353/zl10353.ko make[1]: Leaving directory `/usr/src/linux-2.6.25.9-0.2-obj/x86_64/default' --------------------------------------------------------------------------------------- Best regards, Stefan Am Montag, 21. Juli 2008 22:47:44 schrieben Sie: > Hi, > > On Mon, Jul 21, 2008 at 10:12 PM, Stefan <[EMAIL PROTECTED]> wrote: > > Hello everyone! > > > > I try to install the driver under opensuse 10.3 and 11.0. Both systems > > are installed fresh and the failure comes also with all updates > > installed. When i plug in the device the driver look like loaded OK the > > dmesg: > > > > ------------------------------------------------------------------------- > >----------- > > > > > > usb 6-1: new high speed USB device using ehci_hcd and address 2 > > usb 6-1: configuration #1 chosen from 1 choice > > usb 6-1: New USB device found, idVendor=0ccd, idProduct=0072 > > usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2 > > usb 6-1: Product: Cinergy Hybrid T USB XS FM > > usb 6-1: SerialNumber: 080102004516 > > Linux video capture interface: v2.00 > > em28xx v4l2 driver version 0.0.1 loaded > > em28xx new video device (0ccd:0072): interface 0, class 255 > > em28xx: device is attached to a USB 2.0 bus > > em28xx #0: Alternate settings: 8 > > em28xx #0: Alternate setting 0, max size= 0 > > em28xx #0: Alternate setting 1, max size= 0 > > em28xx #0: Alternate setting 2, max size= 1448 > > em28xx #0: Alternate setting 3, max size= 2048 > > em28xx #0: Alternate setting 4, max size= 2304 > > em28xx #0: Alternate setting 5, max size= 2580 > > em28xx #0: Alternate setting 6, max size= 2892 > > em28xx #0: Alternate setting 7, max size= 3072 > > device has gpio reset values stored on board > > cx25843.c: starting probe for adapter SMBus I801 adapter at 1c20 > > (0x40004) cx25843.c: detecting cx25843 client on address 0x88 > > input: em2880/em2870 remote control as /devices/virtual/input/input7 > > em28xx-input.c: remote control handler attached > > cx25843.c: starting probe for adapter em28xx #0 (0x1001f) > > cx25843.c: detecting cx25843 client on address 0x88 > > attach_inform: msp34xx/cx25843 detected. > > trying to attach xc5000 > > attaching xc5000 tuner module > > successfully attached tuner > > radio device registered as /dev/radio0 > > em28xx #0: AC97 command still being executed: not handled properly! > > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > > em28xx #0: V4L2 device registered as /dev/video0 > > em28xx #0: Found Terratec Hybrid XS FM (em2883) > > usbcore: registered new interface driver em28xx > > radio open() > > modelock active! > > vbi open() > > modelock active! > > analog tv open() > > modelock active! > > tuner' 1-0061: chip found @ 0xc2 (em28xx #0) > > attach inform (default): detected I2C address c2 > > em28xx-audio.c: probing for em28x1 non standard usbaudio > > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > > Em28xx: Initialized (Em28xx Audio Extension) extension > > em2880-dvb.c: DVB Init > > DVB: registering new adapter (em2880 DVB-T) > > DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... > > Em28xx: Initialized (Em2880 DVB Extension) extension > > where did you download this driver? must be some prehistoric version I > guess.. > > Markus > > > ------------------------------------------------------------------------- > >---------------------------- > > > > at next when i start the dvb section in kaffeine nothing will happend > > and the commandline from kaffeine and the dmesg tells me following: > > > > ------------------------------------------------------------------------- > >---------------------------- > > > > [EMAIL PROTECTED]:~> kaffeine > > /dev/dvb/adapter0/frontend0 : opened ( Zarlink ZL10353 DVB-T ) > > 0 EPG plugins loaded for device 0:0. > > Loaded epg data : 4134 events (56 msecs) > > [EMAIL PROTECTED]:~> Tuning to: RTL2 / autocount: 0 > > DvbCam::probe(): /dev/dvb/adapter0/ca0: : Datei oder Verzeichnis nicht > > gefunden > > Using DVB device 0:0 "Zarlink ZL10353 DVB-T" > > tuning DVB-T to 538000000 Hz > > inv:2 bw:0 fecH:2 fecL:9 mod:1 tm:1 gi:3 hier:0 > > ...... > > > > Not able to lock to the signal on the given frequency > > Frontend closed > > Tuning delay: 1139 ms > > > > dmesg: > > SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=172.16.54.1 DST=224.0.0.251 > > LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 > > LEN=44 SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= SRC=192.168.23.1 > > DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP > > SPT=5353 DPT=5353 LEN=44 SFW2-INext-DROP-DEFLT IN=wlan0 OUT= MAC= > > SRC=192.168.2.104 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 > > DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 initializing: 18 > > powered down zl10353 > > initializing: 18 > > FIXME:em28xx_i2c_send_bytes(c2): write failed: > > =============================== > > 00 00 00 00 > > ================================ > > FIXME:em28xx_i2c_send_bytes(c2): write failed: > > =============================== > > 00 01 80 0b > > ================================ > > FIXME:em28xx_i2c_send_bytes(c2): write failed: > > =============================== > > 00 02 00 c0 > > ================================ > > FIXME:em28xx_i2c_send_bytes(c2): write failed: > > =============================== > > 00 05 12 3d > > ================================ > > FIXME:em28xx_i2c_send_bytes(c2): write failed: > > =============================== > > 00 03 85 d0 > > ================================ > > FIXME:em28xx_i2c_send_bytes(c2): write failed: > > =============================== > > 00 0a 00 00 > > ================================ > > powered down zl10353 > > > > ------------------------------------------------------------------------- > >----------- > > > > With the application running i must unplug/plugin the device and then is > > everthing is OK. I can change channels and watch TV until i stop the TV > > watching. Next attempt same problem and i have done the same procedure. > > > > ------------------------------------------------------------------------- > >------------- kaffeine after plug out/in without closing program > > > > Tuning to: RTL2 / autocount: 0 > > Using DVB device 0:0 "Zarlink ZL10353 DVB-T" > > tuning DVB-T to 538000000 Hz > > inv:2 bw:0 fecH:2 fecL:9 mod:1 tm:1 gi:3 hier:0 > > ... LOCKED. > > NOUT: 1 > > dvbEvents 0:0 started > > Tuning delay: 781 ms > > pipe opened > > xine pipe opened /home/sfi/.kaxtv.ts > > > > ------------------------------------------------------------------------- > >--------------------------- > > > > > > The problem still exists also with other programs eg. mplayer, xine ore > > the scan tool for a channel.conf. and as root logged in. > > I hope anyone has a solution for this problem and can help me! > > > > -Stefan > > > > > > > > > > > > > > > > _______________________________________________ > > Em28xx mailing list > > [email protected] > > http://mcentral.de/mailman/listinfo/em28xx _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
