Hi Markus! You say the driver installation looks fine, but the problem is still the same. Did you have any idea what can be wrong in the installation off the apps kaffeine ore xine? The drive say "FIXME:em28xx_i2c_send_bytes(c2): write failed:". What and where trys the driver to write?
Stefan Am Dienstag, 22. Juli 2008 13:10:49 schrieben Sie: > Hi Stefan, > > On Tue, Jul 22, 2008 at 11:06 AM, Stefan <[EMAIL PROTECTED]> wrote: > > Hi Markus > > > > I download the driver from http://mcentral.de/hg/~mrec/em28xx-new acc. > > http://mcentral.de/wiki/index.php5/Installation_Guide. > > $ hg clone http://mentral.de/hg/~mrec/em28xx-new > > this is the best way for downloading the latest repository. > > --------------------------------------------------------------------------- >------------------- > > > [EMAIL PROTECTED]:~/em28xx-new> ./build.sh build > > rm -rf Module.symvers; > > make -C /lib/modules/`if [ -d /lib/modules/2.6.21.4-eeepc ]; then echo > > 2.6.21.4-eeepc; else uname -r; fi`/build SUBDIRS=`pwd` modules > > make[1]: Entering directory > > `/usr/src/linux-2.6.25.9-0.2-obj/x86_64/default' make -C > > /usr/src/linux-2.6.25.9-0.2 > > O=/usr/src/linux-2.6.25.9-0.2-obj/x86_64/default/. modules > > CC [M] /home/sfi/em28xx-new/em2880-dvb.o > > /home/sfi/em28xx-new/em2880-dvb.c: In function 'em28xx_zl10353_sleep': > > /home/sfi/em28xx-new/em2880-dvb.c:698: warning: unused variable > > 'gpio_arg' CC [M] /home/sfi/em28xx-new/em28xx-video.o > > CC [M] /home/sfi/em28xx-new/em28xx-i2c.o > > /home/sfi/em28xx-new/em28xx-i2c.c:677: warning: 'inc_use' defined but not > > used /home/sfi/em28xx-new/em28xx-i2c.c:684: warning: 'dec_use' defined > > but not used CC [M] /home/sfi/em28xx-new/em28xx-cards.o > > CC [M] /home/sfi/em28xx-new/em28xx-core.o > > CC [M] /home/sfi/em28xx-new/em28xx-input.o > > CC [M] /home/sfi/em28xx-new/em28xx-webcam.o > > CC [M] /home/sfi/em28xx-new/em28xx-keymaps.o > > LD [M] /home/sfi/em28xx-new/em28xx.o > > CC [M] /home/sfi/em28xx-new/em28xx-audio.o > > LD [M] /home/sfi/em28xx-new/em28xx-dvb.o > > CC [M] /home/sfi/em28xx-new/cx25843/em28xx-cx25843.o > > CC [M] /home/sfi/em28xx-new/drx3973d/drx3973d_demod.o > > CC [M] /home/sfi/em28xx-new/drx3973d/drx3973d_core.o > > /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:6059:8: > > warning: "COMPILE_FOR_QT" is not defined > > /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:6068:7: > > warning: "COMPILE_FOR_QT" is not defined > > /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:6085:8: > > warning: "COMPILE_FOR_QT" is not defined > > /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:7726:8: > > warning: "COMPILE_FOR_QT" is not defined > > /home/sfi/em28xx-new/drx3973d/drx3973d_core.c: In function > > 'DRX3973D_Open': /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:7799: > > warning: enumeration value 'DRX3973D_SPIN_UNKNOWN' not handled in switch > > /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:7915:8: > > warning: "COMPILE_FOR_QT" is not defined > > /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:7927:8: > > warning: "COMPILE_FOR_QT" is not defined > > /home/sfi/em28xx-new/drx3973d/drx3973d_core.c:7933:8: > > warning: "COMPILE_FOR_QT" is not defined > > CC [M] /home/sfi/em28xx-new/drx3973d/drx3973d_host.o > > CC [M] /home/sfi/em28xx-new/drx3973d/drx_dap_wasi.o > > CC [M] /home/sfi/em28xx-new/drx3973d/drx_driver.o > > CC [M] /home/sfi/em28xx-new/drx3973d/drx3973d_i2c.o > > LD [M] /home/sfi/em28xx-new/drx3973d/drx3973d.o > > CC [M] /home/sfi/em28xx-new/lgdt3304/lgdt3304.o > > LD [M] /home/sfi/em28xx-new/lgdt3304/lgdt3304-demod.o > > CC [M] /home/sfi/em28xx-new/mt2060/mt2060.o > > CC [M] /home/sfi/em28xx-new/qt1010/qt1010.o > > CC [M] /home/sfi/em28xx-new/tvp5150/tvp5150.o > > CC [M] /home/sfi/em28xx-new/xc3028/xc3028_control.o > > CC [M] /home/sfi/em28xx-new/xc3028/xc3028_module.o > > LD [M] /home/sfi/em28xx-new/xc3028/xc3028-tuner.o > > CC [M] /home/sfi/em28xx-new/xc5000/xc5000_control.o > > CC [M] /home/sfi/em28xx-new/xc5000/xc5000_module.o > > CC [M] /home/sfi/em28xx-new/xc5000/i2c_driver.o > > LD [M] /home/sfi/em28xx-new/xc5000/xc5000-tuner.o > > CC [M] /home/sfi/em28xx-new/zl10353/zl10353.o > > Building modules, stage 2. > > MODPOST 12 modules > > CC /home/sfi/em28xx-new/cx25843/em28xx-cx25843.mod.o > > LD [M] /home/sfi/em28xx-new/cx25843/em28xx-cx25843.ko > > CC /home/sfi/em28xx-new/drx3973d/drx3973d.mod.o > > LD [M] /home/sfi/em28xx-new/drx3973d/drx3973d.ko > > CC /home/sfi/em28xx-new/em28xx-audio.mod.o > > LD [M] /home/sfi/em28xx-new/em28xx-audio.ko > > CC /home/sfi/em28xx-new/em28xx-dvb.mod.o > > LD [M] /home/sfi/em28xx-new/em28xx-dvb.ko > > CC /home/sfi/em28xx-new/em28xx.mod.o > > LD [M] /home/sfi/em28xx-new/em28xx.ko > > CC /home/sfi/em28xx-new/lgdt3304/lgdt3304-demod.mod.o > > LD [M] /home/sfi/em28xx-new/lgdt3304/lgdt3304-demod.ko > > CC /home/sfi/em28xx-new/mt2060/mt2060.mod.o > > LD [M] /home/sfi/em28xx-new/mt2060/mt2060.ko > > CC /home/sfi/em28xx-new/qt1010/qt1010.mod.o > > LD [M] /home/sfi/em28xx-new/qt1010/qt1010.ko > > CC /home/sfi/em28xx-new/tvp5150/tvp5150.mod.o > > LD [M] /home/sfi/em28xx-new/tvp5150/tvp5150.ko > > CC /home/sfi/em28xx-new/xc3028/xc3028-tuner.mod.o > > LD [M] /home/sfi/em28xx-new/xc3028/xc3028-tuner.ko > > CC /home/sfi/em28xx-new/xc5000/xc5000-tuner.mod.o > > LD [M] /home/sfi/em28xx-new/xc5000/xc5000-tuner.ko > > CC /home/sfi/em28xx-new/zl10353/zl10353.mod.o > > LD [M] /home/sfi/em28xx-new/zl10353/zl10353.ko > > make[1]: Leaving directory > > `/usr/src/linux-2.6.25.9-0.2-obj/x86_64/default' > > this looks fine! > > Markus > > --------------------------------------------------------------------------- >------------ > > > Best regards, > > Stefan > > > > Am Montag, 21. Juli 2008 22:47:44 schrieben Sie: > >> Hi, > >> > >> On Mon, Jul 21, 2008 at 10:12 PM, Stefan <[EMAIL PROTECTED]> wrote: > >> > Hello everyone! > >> > > >> > I try to install the driver under opensuse 10.3 and 11.0. Both systems > >> > are installed fresh and the failure comes also with all updates > >> > installed. When i plug in the device the driver look like loaded OK > >> > the dmesg: > >> > > >> > ---------------------------------------------------------------------- > >> >--- ----------- > >> > > >> > > >> > usb 6-1: new high speed USB device using ehci_hcd and address 2 > >> > usb 6-1: configuration #1 chosen from 1 choice > >> > usb 6-1: New USB device found, idVendor=0ccd, idProduct=0072 > >> > usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=2 > >> > usb 6-1: Product: Cinergy Hybrid T USB XS FM > >> > usb 6-1: SerialNumber: 080102004516 > >> > Linux video capture interface: v2.00 > >> > em28xx v4l2 driver version 0.0.1 loaded > >> > em28xx new video device (0ccd:0072): interface 0, class 255 > >> > em28xx: device is attached to a USB 2.0 bus > >> > em28xx #0: Alternate settings: 8 > >> > em28xx #0: Alternate setting 0, max size= 0 > >> > em28xx #0: Alternate setting 1, max size= 0 > >> > em28xx #0: Alternate setting 2, max size= 1448 > >> > em28xx #0: Alternate setting 3, max size= 2048 > >> > em28xx #0: Alternate setting 4, max size= 2304 > >> > em28xx #0: Alternate setting 5, max size= 2580 > >> > em28xx #0: Alternate setting 6, max size= 2892 > >> > em28xx #0: Alternate setting 7, max size= 3072 > >> > device has gpio reset values stored on board > >> > cx25843.c: starting probe for adapter SMBus I801 adapter at 1c20 > >> > (0x40004) cx25843.c: detecting cx25843 client on address 0x88 > >> > input: em2880/em2870 remote control as /devices/virtual/input/input7 > >> > em28xx-input.c: remote control handler attached > >> > cx25843.c: starting probe for adapter em28xx #0 (0x1001f) > >> > cx25843.c: detecting cx25843 client on address 0x88 > >> > attach_inform: msp34xx/cx25843 detected. > >> > trying to attach xc5000 > >> > attaching xc5000 tuner module > >> > successfully attached tuner > >> > radio device registered as /dev/radio0 > >> > em28xx #0: AC97 command still being executed: not handled properly! > >> > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > >> > em28xx #0: V4L2 device registered as /dev/video0 > >> > em28xx #0: Found Terratec Hybrid XS FM (em2883) > >> > usbcore: registered new interface driver em28xx > >> > radio open() > >> > modelock active! > >> > vbi open() > >> > modelock active! > >> > analog tv open() > >> > modelock active! > >> > tuner' 1-0061: chip found @ 0xc2 (em28xx #0) > >> > attach inform (default): detected I2C address c2 > >> > em28xx-audio.c: probing for em28x1 non standard usbaudio > >> > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger > >> > Em28xx: Initialized (Em28xx Audio Extension) extension > >> > em2880-dvb.c: DVB Init > >> > DVB: registering new adapter (em2880 DVB-T) > >> > DVB: registering frontend 0 (Zarlink ZL10353 DVB-T)... > >> > Em28xx: Initialized (Em2880 DVB Extension) extension > >> > >> where did you download this driver? must be some prehistoric version I > >> guess.. > >> > >> Markus > >> > >> > ---------------------------------------------------------------------- > >> >--- ---------------------------- > >> > > >> > at next when i start the dvb section in kaffeine nothing will happend > >> > and the commandline from kaffeine and the dmesg tells me following: > >> > > >> > ---------------------------------------------------------------------- > >> >--- ---------------------------- > >> > > >> > [EMAIL PROTECTED]:~> kaffeine > >> > /dev/dvb/adapter0/frontend0 : opened ( Zarlink ZL10353 DVB-T ) > >> > 0 EPG plugins loaded for device 0:0. > >> > Loaded epg data : 4134 events (56 msecs) > >> > [EMAIL PROTECTED]:~> Tuning to: RTL2 / autocount: 0 > >> > DvbCam::probe(): /dev/dvb/adapter0/ca0: : Datei oder Verzeichnis nicht > >> > gefunden > >> > Using DVB device 0:0 "Zarlink ZL10353 DVB-T" > >> > tuning DVB-T to 538000000 Hz > >> > inv:2 bw:0 fecH:2 fecL:9 mod:1 tm:1 gi:3 hier:0 > >> > ...... > >> > > >> > Not able to lock to the signal on the given frequency > >> > Frontend closed > >> > Tuning delay: 1139 ms > >> > > >> > dmesg: > >> > SFW2-INext-DROP-DEFLT IN=vmnet1 OUT= MAC= SRC=172.16.54.1 > >> > DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP > >> > SPT=5353 DPT=5353 LEN=44 SFW2-INext-DROP-DEFLT IN=vmnet8 OUT= MAC= > >> > SRC=192.168.23.1 DST=224.0.0.251 LEN=64 TOS=0x00 PREC=0x00 TTL=255 > >> > ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 SFW2-INext-DROP-DEFLT > >> > IN=wlan0 OUT= MAC= SRC=192.168.2.104 DST=224.0.0.251 LEN=64 TOS=0x00 > >> > PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=44 > >> > initializing: 18 > >> > powered down zl10353 > >> > initializing: 18 > >> > FIXME:em28xx_i2c_send_bytes(c2): write failed: > >> > =============================== > >> > 00 00 00 00 > >> > ================================ > >> > FIXME:em28xx_i2c_send_bytes(c2): write failed: > >> > =============================== > >> > 00 01 80 0b > >> > ================================ > >> > FIXME:em28xx_i2c_send_bytes(c2): write failed: > >> > =============================== > >> > 00 02 00 c0 > >> > ================================ > >> > FIXME:em28xx_i2c_send_bytes(c2): write failed: > >> > =============================== > >> > 00 05 12 3d > >> > ================================ > >> > FIXME:em28xx_i2c_send_bytes(c2): write failed: > >> > =============================== > >> > 00 03 85 d0 > >> > ================================ > >> > FIXME:em28xx_i2c_send_bytes(c2): write failed: > >> > =============================== > >> > 00 0a 00 00 > >> > ================================ > >> > powered down zl10353 > >> > > >> > ---------------------------------------------------------------------- > >> >--- ----------- > >> > > >> > With the application running i must unplug/plugin the device and then > >> > is everthing is OK. I can change channels and watch TV until i stop > >> > the TV watching. Next attempt same problem and i have done the same > >> > procedure. > >> > > >> > ---------------------------------------------------------------------- > >> >--- ------------- kaffeine after plug out/in without closing program > >> > > >> > Tuning to: RTL2 / autocount: 0 > >> > Using DVB device 0:0 "Zarlink ZL10353 DVB-T" > >> > tuning DVB-T to 538000000 Hz > >> > inv:2 bw:0 fecH:2 fecL:9 mod:1 tm:1 gi:3 hier:0 > >> > ... LOCKED. > >> > NOUT: 1 > >> > dvbEvents 0:0 started > >> > Tuning delay: 781 ms > >> > pipe opened > >> > xine pipe opened /home/sfi/.kaxtv.ts > >> > > >> > ---------------------------------------------------------------------- > >> >--- --------------------------- > >> > > >> > > >> > The problem still exists also with other programs eg. mplayer, xine > >> > ore the scan tool for a channel.conf. and as root logged in. > >> > I hope anyone has a solution for this problem and can help me! > >> > > >> > -Stefan > >> > > >> > > >> > > >> > > >> > > >> > > >> > > >> > _______________________________________________ > >> > Em28xx mailing list > >> > [email protected] > >> > http://mcentral.de/mailman/listinfo/em28xx _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
