Thanks Valerio and Markus,
That's exactly what I did per Valerio's suggestion and it worked,
now I'm facing the problem of not being able to tune any digital station
even
if I have extracted the es-Malaga (the city where I live in Spain) and run
the
scan program over it, but well... it's just another little step, other than
that,
the analog inputs are working really great (tested so far with zapping).
Thanks a lot :D
Julio
--------------------------------------------------
From: "Markus Rechberger" <[email protected]>
Sent: Friday, January 09, 2009 3:13 PM
To: "Julio Meca Hansen" <[email protected]>
Cc: <[email protected]>
Subject: Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028
firmware?
On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen
<[email protected]> wrote:
Hi,
I'm trying to support this device under my Linux distro (LFS based, so
custom made from sources) and I'm bit stucked.
I have downloaded firmware_v2.tgz and included support for this device
in the kernel, but it fails at the time of loading the xc3028-v27.fw
file.
just try to compile the driver from mcentral.de, it has the firmware
built in already.
$ hg clone http://mcentral.de/hg/~mrec/em28xx-new
$ cd em28xx-new
$ make
$ make install
$ - reboot -
if you installed the code from linuxtv.org you probably upgraded the
whole media framework
you would have to run make modules_install in the kernel sourcetree
again in order to revert
the media core, the em28xx-new repository only contains the driver and
not the whole media framework.
regards,
Markus
Here is the output of dmesg:
em28xx new video device (0ccd:005e): interface 0, class 255
em28xx Doesn't have usb audio class
em28xx #0: Alternate settings: 8
em28xx #0: Alternate setting 0, max size= 0
em28xx #0: Alternate setting 1, max size= 0
em28xx #0: Alternate setting 2, max size= 1448
em28xx #0: Alternate setting 3, max size= 2048
em28xx #0: Alternate setting 4, max size= 2304
em28xx #0: Alternate setting 5, max size= 2580
em28xx #0: Alternate setting 6, max size= 2892
em28xx #0: Alternate setting 7, max size= 3072
em28xx #0: chip ID is em2882/em2883
Clocksource tsc unstable (delta = -62880812 ns)
tuner' 1-0061: chip found @ 0xc2 (em28xx #0)
em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de
1c
em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00
00
em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00
00
em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00
00
em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00
em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00
em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65
00
em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45
00
em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69
00
em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40
03
em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20
00
em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54
00
em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20
00
em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c
03
em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30
00
em28xx #0: i2c eeprom f0: 36 00 32 00 36 00 31 00 00 00 00 00 00 00 00
00
EEPROM ID= 0x9567eb1a, hash = 0x5a13bfbe
Vendor/Product ID= 0ccd:005e
AC97 audio (5 sample rates)
500mA max power
Table at 0x27, strings=0x409e, 0x1cde, 0x346a
em28xx #0:
em28xx #0: The support for this board weren't valid yet.
em28xx #0: Please send a report of having this working
em28xx #0: not to V4L mailing list (and/or to other addresses)
xc2028 1-0061: creating new instance
xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner
i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps:
0xc04751/0xe0500f
input: SynPS/2 Synaptics TouchPad as /class/input/input5
Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps:
0xa04711/0xa04000
input: SynPS/2 Synaptics TouchPad as /class/input/input6
input: AT Translated Set 2 keyboard as /class/input/input7
xc2028 1-0061: Error: firmware xc3028-v27.fw not found.
tvp5150 1-005c: tvp5150am1 detected.
em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0
em28xx-audio.c: probing for em28x1 non standard usbaudio
em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
em28xx #0: Found Terratec Hybrid XS (em2882)
my xc3028-v27.fw file is located in /lib/firmware among the other files
in the firmware_v2.tgz file, and I extracted it using the
extract-xc3028.pl perl script using the Hauppauge windows driver as
stated in
http://lists-archives.org/video4linux/20831-extract-tool-for-xc3028-firmware.html
I'm curious because my windows driver (under windows xp 32bit) is named
emBDA.sys, but I have tried the convert.c utility and it doesn't work,
it produces 0 output.
Is it something more I need in order to correct this last step prior to
have my tv tuner working?
Thanks in advance,
Julio
_______________________________________________
Em28xx mailing list
[email protected]
http://mcentral.de/mailman/listinfo/em28xx
_______________________________________________
Em28xx mailing list
[email protected]
http://mcentral.de/mailman/listinfo/em28xx
