On Fri, Jan 9, 2009 at 7:20 PM, Julio Meca Hansen <lydiankni...@gmail.com> wrote: > This is my new dmesg output (dmesg | grep em28 && dmesg | grep DVB): > > em28xx v4l2 driver version 0.0.1 loaded > em28xx: new video device (0ccd:005e): interface 0, class 255 > em28xx: device is attached to a USB 2.0 bus > em28xx #0: Alternate settings: 8 > em28xx #0: Alternate setting 0, max size= 0 > em28xx #0: Alternate setting 1, max size= 0 > em28xx #0: Alternate setting 2, max size= 1448 > em28xx #0: Alternate setting 3, max size= 2048 > em28xx #0: Alternate setting 4, max size= 2304 > em28xx #0: Alternate setting 5, max size= 2580 > em28xx #0: Alternate setting 6, max size= 2892 > em28xx #0: Alternate setting 7, max size= 3072 > em28xx #0: V4L2 VBI device registered as /dev/vbi0 > em28xx #0: V4L2 device registered as /dev/video1 > input: em2880/em2870 remote control as /class/input/input9 > em28xx-input.c: remote control handler attached > em28xx #0: Found Empia Hybrid ATSC (em2882) > usbcore: registered new interface driver em28xx > em28xx-audio.c: probing for em28x1 non standard usbaudio > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger
---- > em2880-dvb.c: DVB Init > DVB: registering new adapter (em2880 DVB-T) > em2880-dvb.c: DVB Init > DVB: registering new adapter (em2880 DVB-T) guess this was a copy/paste error? Markus > DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... > Em28xx: Initialized (Em2880 DVB Extension) extension > > Julio > > On Fri, 2009-01-09 at 18:16 +0100, Markus Rechberger wrote: >> On Fri, Jan 9, 2009 at 6:08 PM, Julio Meca Hansen >> <lydiankni...@gmail.com> wrote: >> > Thanks Valerio and Markus, >> > >> > That's exactly what I did per Valerio's suggestion and it worked, >> > now I'm facing the problem of not being able to tune any digital station >> > even >> > if I have extracted the es-Malaga (the city where I live in Spain) and run >> > the >> > scan program over it, but well... it's just another little step, other than >> > that, >> > the analog inputs are working really great (tested so far with zapping). >> > >> >> what does dmesg show up? >> >> Markus >> >> > Thanks a lot :D >> > >> > Julio >> > >> > -------------------------------------------------- >> > From: "Markus Rechberger" <mrechber...@gmail.com> >> > Sent: Friday, January 09, 2009 3:13 PM >> > To: "Julio Meca Hansen" <lydiankni...@gmail.com> >> > Cc: <em28xx@mcentral.de> >> > Subject: Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect XC3028 >> > firmware? >> > >> >> On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen >> >> <lydiankni...@gmail.com> wrote: >> >>> >> >>> Hi, >> >>> >> >>> I'm trying to support this device under my Linux distro (LFS based, so >> >>> custom made from sources) and I'm bit stucked. >> >>> >> >>> I have downloaded firmware_v2.tgz and included support for this device >> >>> in the kernel, but it fails at the time of loading the xc3028-v27.fw >> >>> file. >> >>> >> >> >> >> just try to compile the driver from mcentral.de, it has the firmware >> >> built in already. >> >> >> >> $ hg clone http://mcentral.de/hg/~mrec/em28xx-new >> >> $ cd em28xx-new >> >> $ make >> >> $ make install >> >> $ - reboot - >> >> >> >> if you installed the code from linuxtv.org you probably upgraded the >> >> whole media framework >> >> you would have to run make modules_install in the kernel sourcetree >> >> again in order to revert >> >> the media core, the em28xx-new repository only contains the driver and >> >> not the whole media framework. >> >> >> >> regards, >> >> Markus >> >> >> >>> Here is the output of dmesg: >> >>> >> >>> em28xx new video device (0ccd:005e): interface 0, class 255 >> >>> em28xx Doesn't have usb audio class >> >>> em28xx #0: Alternate settings: 8 >> >>> em28xx #0: Alternate setting 0, max size= 0 >> >>> em28xx #0: Alternate setting 1, max size= 0 >> >>> em28xx #0: Alternate setting 2, max size= 1448 >> >>> em28xx #0: Alternate setting 3, max size= 2048 >> >>> em28xx #0: Alternate setting 4, max size= 2304 >> >>> em28xx #0: Alternate setting 5, max size= 2580 >> >>> em28xx #0: Alternate setting 6, max size= 2892 >> >>> em28xx #0: Alternate setting 7, max size= 3072 >> >>> em28xx #0: chip ID is em2882/em2883 >> >>> Clocksource tsc unstable (delta = -62880812 ns) >> >>> tuner' 1-0061: chip found @ 0xc2 (em28xx #0) >> >>> em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de >> >>> 1c >> >>> em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 >> >>> 00 >> >>> em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 >> >>> 00 >> >>> em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 >> >>> 00 >> >>> em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >>> 00 >> >>> em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >>> 00 >> >>> em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 >> >>> 00 >> >>> em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 >> >>> 00 >> >>> em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 >> >>> 00 >> >>> em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 >> >>> 03 >> >>> em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 >> >>> 00 >> >>> em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 >> >>> 00 >> >>> em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 >> >>> 00 >> >>> em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c >> >>> 03 >> >>> em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 >> >>> 00 >> >>> em28xx #0: i2c eeprom f0: 36 00 32 00 36 00 31 00 00 00 00 00 00 00 00 >> >>> 00 >> >>> EEPROM ID= 0x9567eb1a, hash = 0x5a13bfbe >> >>> Vendor/Product ID= 0ccd:005e >> >>> AC97 audio (5 sample rates) >> >>> 500mA max power >> >>> Table at 0x27, strings=0x409e, 0x1cde, 0x346a >> >>> em28xx #0: >> >>> >> >>> em28xx #0: The support for this board weren't valid yet. >> >>> em28xx #0: Please send a report of having this working >> >>> em28xx #0: not to V4L mailing list (and/or to other addresses) >> >>> >> >>> xc2028 1-0061: creating new instance >> >>> xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner >> >>> i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw >> >>> Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: >> >>> 0xc04751/0xe0500f >> >>> input: SynPS/2 Synaptics TouchPad as /class/input/input5 >> >>> Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: >> >>> 0xa04711/0xa04000 >> >>> input: SynPS/2 Synaptics TouchPad as /class/input/input6 >> >>> input: AT Translated Set 2 keyboard as /class/input/input7 >> >>> xc2028 1-0061: Error: firmware xc3028-v27.fw not found. >> >>> tvp5150 1-005c: tvp5150am1 detected. >> >>> em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 >> >>> em28xx-audio.c: probing for em28x1 non standard usbaudio >> >>> em28xx-audio.c: Copyright (C) 2006 Markus Rechberger >> >>> em28xx #0: Found Terratec Hybrid XS (em2882) >> >>> >> >>> my xc3028-v27.fw file is located in /lib/firmware among the other files >> >>> in the firmware_v2.tgz file, and I extracted it using the >> >>> extract-xc3028.pl perl script using the Hauppauge windows driver as >> >>> stated in >> >>> >> >>> http://lists-archives.org/video4linux/20831-extract-tool-for-xc3028-firmware.html >> >>> >> >>> I'm curious because my windows driver (under windows xp 32bit) is named >> >>> emBDA.sys, but I have tried the convert.c utility and it doesn't work, >> >>> it produces 0 output. >> >>> >> >>> Is it something more I need in order to correct this last step prior to >> >>> have my tv tuner working? >> >>> >> >>> Thanks in advance, >> >>> Julio >> >>> >> >>> >> >>> _______________________________________________ >> >>> Em28xx mailing list >> >>> Em28xx@mcentral.de >> >>> http://mcentral.de/mailman/listinfo/em28xx >> >>> >> > > > _______________________________________________ Em28xx mailing list Em28xx@mcentral.de http://mcentral.de/mailman/listinfo/em28xx