On Fri, Jan 9, 2009 at 7:36 PM, Julio Meca Hansen <[email protected]> wrote: > Oops, my bad, double grep makes for a double error :S > > Yes, the entry is not duplicated in the full dmesg. >
I'll check that device tomorrow again I have it here too. The ATSC description in dmesg is wrong but I noticed it it was set to an engineering sample at one time, expect to have it work tomorrow then. Markus > Julio > > On Fri, 2009-01-09 at 19:33 +0100, Markus Rechberger wrote: >> On Fri, Jan 9, 2009 at 7:20 PM, Julio Meca Hansen >> <[email protected]> wrote: >> > This is my new dmesg output (dmesg | grep em28 && dmesg | grep DVB): >> > >> > em28xx v4l2 driver version 0.0.1 loaded >> > em28xx: new video device (0ccd:005e): interface 0, class 255 >> > em28xx: device is attached to a USB 2.0 bus >> > em28xx #0: Alternate settings: 8 >> > em28xx #0: Alternate setting 0, max size= 0 >> > em28xx #0: Alternate setting 1, max size= 0 >> > em28xx #0: Alternate setting 2, max size= 1448 >> > em28xx #0: Alternate setting 3, max size= 2048 >> > em28xx #0: Alternate setting 4, max size= 2304 >> > em28xx #0: Alternate setting 5, max size= 2580 >> > em28xx #0: Alternate setting 6, max size= 2892 >> > em28xx #0: Alternate setting 7, max size= 3072 >> > em28xx #0: V4L2 VBI device registered as /dev/vbi0 >> > em28xx #0: V4L2 device registered as /dev/video1 >> > input: em2880/em2870 remote control as /class/input/input9 >> > em28xx-input.c: remote control handler attached >> > em28xx #0: Found Empia Hybrid ATSC (em2882) >> > usbcore: registered new interface driver em28xx >> > em28xx-audio.c: probing for em28x1 non standard usbaudio >> > em28xx-audio.c: Copyright (C) 2006 Markus Rechberger >> >> ---- >> > em2880-dvb.c: DVB Init >> > DVB: registering new adapter (em2880 DVB-T) >> > em2880-dvb.c: DVB Init >> > DVB: registering new adapter (em2880 DVB-T) >> >> guess this was a copy/paste error? >> >> Markus >> >> > DVB: registering adapter 0 frontend 0 (Zarlink ZL10353 DVB-T)... >> > Em28xx: Initialized (Em2880 DVB Extension) extension >> > >> > Julio >> > >> > On Fri, 2009-01-09 at 18:16 +0100, Markus Rechberger wrote: >> >> On Fri, Jan 9, 2009 at 6:08 PM, Julio Meca Hansen >> >> <[email protected]> wrote: >> >> > Thanks Valerio and Markus, >> >> > >> >> > That's exactly what I did per Valerio's suggestion and it worked, >> >> > now I'm facing the problem of not being able to tune any digital station >> >> > even >> >> > if I have extracted the es-Malaga (the city where I live in Spain) and >> >> > run >> >> > the >> >> > scan program over it, but well... it's just another little step, other >> >> > than >> >> > that, >> >> > the analog inputs are working really great (tested so far with zapping). >> >> > >> >> >> >> what does dmesg show up? >> >> >> >> Markus >> >> >> >> > Thanks a lot :D >> >> > >> >> > Julio >> >> > >> >> > -------------------------------------------------- >> >> > From: "Markus Rechberger" <[email protected]> >> >> > Sent: Friday, January 09, 2009 3:13 PM >> >> > To: "Julio Meca Hansen" <[email protected]> >> >> > Cc: <[email protected]> >> >> > Subject: Re: [Em28xx] Terratec Cinergy T USB XS (em2882) - Incorrect >> >> > XC3028 >> >> > firmware? >> >> > >> >> >> On Fri, Jan 9, 2009 at 2:15 PM, Julio Meca Hansen >> >> >> <[email protected]> wrote: >> >> >>> >> >> >>> Hi, >> >> >>> >> >> >>> I'm trying to support this device under my Linux distro (LFS based, so >> >> >>> custom made from sources) and I'm bit stucked. >> >> >>> >> >> >>> I have downloaded firmware_v2.tgz and included support for this device >> >> >>> in the kernel, but it fails at the time of loading the xc3028-v27.fw >> >> >>> file. >> >> >>> >> >> >> >> >> >> just try to compile the driver from mcentral.de, it has the firmware >> >> >> built in already. >> >> >> >> >> >> $ hg clone http://mcentral.de/hg/~mrec/em28xx-new >> >> >> $ cd em28xx-new >> >> >> $ make >> >> >> $ make install >> >> >> $ - reboot - >> >> >> >> >> >> if you installed the code from linuxtv.org you probably upgraded the >> >> >> whole media framework >> >> >> you would have to run make modules_install in the kernel sourcetree >> >> >> again in order to revert >> >> >> the media core, the em28xx-new repository only contains the driver and >> >> >> not the whole media framework. >> >> >> >> >> >> regards, >> >> >> Markus >> >> >> >> >> >>> Here is the output of dmesg: >> >> >>> >> >> >>> em28xx new video device (0ccd:005e): interface 0, class 255 >> >> >>> em28xx Doesn't have usb audio class >> >> >>> em28xx #0: Alternate settings: 8 >> >> >>> em28xx #0: Alternate setting 0, max size= 0 >> >> >>> em28xx #0: Alternate setting 1, max size= 0 >> >> >>> em28xx #0: Alternate setting 2, max size= 1448 >> >> >>> em28xx #0: Alternate setting 3, max size= 2048 >> >> >>> em28xx #0: Alternate setting 4, max size= 2304 >> >> >>> em28xx #0: Alternate setting 5, max size= 2580 >> >> >>> em28xx #0: Alternate setting 6, max size= 2892 >> >> >>> em28xx #0: Alternate setting 7, max size= 3072 >> >> >>> em28xx #0: chip ID is em2882/em2883 >> >> >>> Clocksource tsc unstable (delta = -62880812 ns) >> >> >>> tuner' 1-0061: chip found @ 0xc2 (em28xx #0) >> >> >>> em28xx #0: i2c eeprom 00: 1a eb 67 95 cd 0c 5e 00 d0 12 5c 03 9e 40 de >> >> >>> 1c >> >> >>> em28xx #0: i2c eeprom 10: 6a 34 27 57 46 07 01 00 00 00 00 00 00 00 00 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 31 00 b8 00 14 00 5b 1e 00 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 00 00 00 00 00 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 34 03 54 00 65 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom 70: 72 00 72 00 61 00 54 00 65 00 63 00 20 00 45 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom 80: 6c 00 65 00 63 00 74 00 72 00 6f 00 6e 00 69 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom 90: 63 00 20 00 47 00 6d 00 62 00 48 00 00 00 40 >> >> >>> 03 >> >> >>> em28xx #0: i2c eeprom a0: 43 00 69 00 6e 00 65 00 72 00 67 00 79 00 20 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom b0: 48 00 79 00 62 00 72 00 69 00 64 00 20 00 54 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom c0: 20 00 55 00 53 00 42 00 20 00 58 00 53 00 20 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom d0: 28 00 32 00 38 00 38 00 32 00 29 00 00 00 1c >> >> >>> 03 >> >> >>> em28xx #0: i2c eeprom e0: 30 00 37 00 30 00 32 00 30 00 31 00 30 00 30 >> >> >>> 00 >> >> >>> em28xx #0: i2c eeprom f0: 36 00 32 00 36 00 31 00 00 00 00 00 00 00 00 >> >> >>> 00 >> >> >>> EEPROM ID= 0x9567eb1a, hash = 0x5a13bfbe >> >> >>> Vendor/Product ID= 0ccd:005e >> >> >>> AC97 audio (5 sample rates) >> >> >>> 500mA max power >> >> >>> Table at 0x27, strings=0x409e, 0x1cde, 0x346a >> >> >>> em28xx #0: >> >> >>> >> >> >>> em28xx #0: The support for this board weren't valid yet. >> >> >>> em28xx #0: Please send a report of having this working >> >> >>> em28xx #0: not to V4L mailing list (and/or to other addresses) >> >> >>> >> >> >>> xc2028 1-0061: creating new instance >> >> >>> xc2028 1-0061: type set to XCeive xc2028/xc3028 tuner >> >> >>> i2c-adapter i2c-1: firmware: requesting xc3028-v27.fw >> >> >>> Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1e0b1, caps: >> >> >>> 0xc04751/0xe0500f >> >> >>> input: SynPS/2 Synaptics TouchPad as /class/input/input5 >> >> >>> Synaptics Touchpad, model: 1, fw: 6.5, id: 0x81a0b1, caps: >> >> >>> 0xa04711/0xa04000 >> >> >>> input: SynPS/2 Synaptics TouchPad as /class/input/input6 >> >> >>> input: AT Translated Set 2 keyboard as /class/input/input7 >> >> >>> xc2028 1-0061: Error: firmware xc3028-v27.fw not found. >> >> >>> tvp5150 1-005c: tvp5150am1 detected. >> >> >>> em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 >> >> >>> em28xx-audio.c: probing for em28x1 non standard usbaudio >> >> >>> em28xx-audio.c: Copyright (C) 2006 Markus Rechberger >> >> >>> em28xx #0: Found Terratec Hybrid XS (em2882) >> >> >>> >> >> >>> my xc3028-v27.fw file is located in /lib/firmware among the other >> >> >>> files >> >> >>> in the firmware_v2.tgz file, and I extracted it using the >> >> >>> extract-xc3028.pl perl script using the Hauppauge windows driver as >> >> >>> stated in >> >> >>> >> >> >>> http://lists-archives.org/video4linux/20831-extract-tool-for-xc3028-firmware.html >> >> >>> >> >> >>> I'm curious because my windows driver (under windows xp 32bit) is >> >> >>> named >> >> >>> emBDA.sys, but I have tried the convert.c utility and it doesn't work, >> >> >>> it produces 0 output. >> >> >>> >> >> >>> Is it something more I need in order to correct this last step prior >> >> >>> to >> >> >>> have my tv tuner working? >> >> >>> >> >> >>> Thanks in advance, >> >> >>> Julio >> >> >>> >> >> >>> >> >> >>> _______________________________________________ >> >> >>> Em28xx mailing list >> >> >>> [email protected] >> >> >>> http://mcentral.de/mailman/listinfo/em28xx >> >> >>> >> >> > >> > >> > > > _______________________________________________ Em28xx mailing list [email protected] http://mcentral.de/mailman/listinfo/em28xx
