I just checked the version of emane I'm running; 1.0.1. I got the gpsdconnectionenabled parameter by looking through the XML configuration files in the emane tutorial at https://github.com/adjacentlink/emane-tutorial/blob/master/3/gpsdlocationagent.xml and https://github.com/adjacentlink/emane-tutorial/blob/master/4/gpsdlocationagent.xml. Is that code now out of date? It is also in /usr/share/emane/xml/agents/gpsdlocation/gpsdlocationagent.xml, at least on my system. After deleting gpsdconnectionenabled, I reran everything and now have errors on gpsdcontrolsocket. I got that parameter out of the emane tutorials as well, and it also shows up in /usr/share/emane/xml/agents/gpsdlocation/gpsdlocationagent.xml. I deleted that one as well, and now only have the error that you mentioned below about emane being run on the host.
So, how do the tutorials handle starting emane within each of the containers? I took the code at https://github.com/adjacentlink/emane-tutorial/blob/master/scripts/democtl-host and https://github.com/adjacentlink/emane-tutorial/blob/master/scripts/demo-init as starting points in how I'm supposed to do things, but it appears that things aren't working as expected. Thank you again for all your help in this; it really is a big help. Thanks, Cem Karan --- Other than quoted laws, regulations or officially published policies, the views expressed herein are not intended to be used as an authoritative state of the law nor do they reflect official positions of the U.S. Army, Department of Defense or U.S. Government. > -----Original Message----- > From: Steven Galgano [mailto:sgalg...@adjacentlink.com] > Sent: Monday, February 05, 2018 2:32 PM > To: Karan, Cem F CIV USARMY RDECOM ARL (US) <cem.f.karan....@mail.mil> > Cc: emane-users@nrl.navy.mil > Subject: Re: [Non-DoD Source] Re: [emane-users] Help understanding > 'platformendpoint' and 'transportendpoint' > > Cem, > > The XML you are running is for an older version of emane. To start with, > remove the 'gpsdconnectionenabled' parameter from the > gpsdlocationagent XML. That will help emaneeventd to start without error. > > Your emane XML is using eth1 as your OTA channel device. It does not appear > that eth1 is up when emane is started. Hence the: > > StartException: Platform OTA Manager: Unable to open OTA Manager socket: > '224.1.2.8:45702'. > > Possible reason(s): > * No Multicast device specified and routing table nondeterministic > (no multicast route and no default route). > * Multicast device eth1 does not exist or is not up. > > Looking closer at your emane log file name: > > persist/host/var/log/emane.log > > and since you are using the emane tutorial test flow, that tells me you are > running emane on the host (which has no eth1). > > You need to run emane in your containers. Specifically, an emane instance in > each container representing a mobile node. > > -steve > > > On 02/05/2018 02:15 PM, Karan, Cem F CIV USARMY RDECOM ARL (US) wrote: > > That turned up one error, although it didn't fix the problem; I forgot > > I had already SSH'd into a node when I tried re-running all lxc > > commands. That is what was leading to the lxc errors. After I exited > > the SSH session, lxc works; or at least, it never logs an error, > > either in my own code or in any of the tutorial code. > > > > That said, it doesn't fix the original problem. Here is the output of > > the log > > files: > > > > VVVVVVVVVVVVVVVVVVVVV > > file: ./persist/1/var/log/emaneeventd.log > > > > 13:53:47.436807 INFO application: emaneeventd -r -d -l 3 -f > > /home/cfkaran2/Documents/EMANE_dissertation/10/persist/1/var/log/emane > > eventd.log > > --pidfile > > /home/cfkaran2/Documents/EMANE_dissertation/10/persist/1/var/run/emane > > eventd.pid > > --uuidfile > > /home/cfkaran2/Documents/EMANE_dissertation/10/persist/1/var/run/emane > > eventd.uuid > > eventdaemon1.xml > > 13:53:47.436917 INFO application uuid: > > c25e1fe2-5f7f-4224-8840-215ef823a716 > > 13:53:47.437603 ABORT ConfigurationException: Parameter not registered > > gpsdconnectionenabled ^^^^^^^^^^^^^^^^^^^^^ > > > > > > VVVVVVVVVVVVVVVVVVVVV > > file: ./persist/1/var/log/lxc-execute.log.1 > > > > ^^^^^^^^^^^^^^^^^^^^^ > > > > > > VVVVVVVVVVVVVVVVVVVVV > > file: ./persist/2/var/log/emaneeventd.log > > > > 13:53:48.476687 INFO application: emaneeventd -r -d -l 3 -f > > /home/cfkaran2/Documents/EMANE_dissertation/10/persist/2/var/log/emane > > eventd.log > > --pidfile > > /home/cfkaran2/Documents/EMANE_dissertation/10/persist/2/var/run/emane > > eventd.pid > > --uuidfile > > /home/cfkaran2/Documents/EMANE_dissertation/10/persist/2/var/run/emane > > eventd.uuid > > eventdaemon2.xml > > 13:53:48.476796 INFO application uuid: > > 78be9323-123d-4a3e-a814-d3b552cc9a36 > > 13:53:48.477354 ABORT ConfigurationException: Parameter not registered > > gpsdconnectionenabled ^^^^^^^^^^^^^^^^^^^^^ > > > > > > VVVVVVVVVVVVVVVVVVVVV > > file: ./persist/2/var/log/lxc-execute.log.2 > > > > ^^^^^^^^^^^^^^^^^^^^^ > > > > > > VVVVVVVVVVVVVVVVVVVVV > > file: ./persist/host/var/log/emane.log > > > > 13:53:49.344832 INFO application: emane -r -d -l 3 -f > > persist/host/var/log/emane.log --pidfile > > persist/host/var/run/emane.pid --uuidfile > > persist/host/var/run/emane.uuid platform.xml > > 13:53:49.345091 INFO application uuid: > > 3695dc2e-04f3-476b-a72d-52a9125c7ad6 > > 13:53:49.346077 INFO TRANSPORTI 001 VirtualTransport::configure address: > > 10.100.0.1 > > 13:53:49.346117 INFO TRANSPORTI 001 VirtualTransport::configure mask: > > 255.255.0.0 > > 13:53:49.346132 INFO TRANSPORTI 001 VirtualTransport::configure > > arpcacheenable: 1 > > 13:53:49.346142 INFO TRANSPORTI 001 VirtualTransport::configure > > arpmodeenable: 1 > > 13:53:49.346152 INFO TRANSPORTI 001 VirtualTransport::configure > > bitrate: 0 > > 13:53:49.346161 INFO TRANSPORTI 001 VirtualTransport::configure > > broadcastmodeenable: 0 > > 13:53:49.346189 INFO TRANSPORTI 001 VirtualTransport::configure device: > > emane0 > > 13:53:49.346201 INFO TRANSPORTI 001 VirtualTransport::configure > > devicepath: > > /dev/net/tun > > 13:53:49.346211 INFO TRANSPORTI 001 VirtualTransport::configure > > flowcontrolenable: 0 > > 13:53:49.347291 INFO MACI 001 MACConfig::configureStaticItems > > pcrcurveuri = > > file:///usr/share/emane/xml/models/mac/ieee80211abg/ieee80211pcr.xml > > 13:53:49.347333 INFO MACI 001 MACConfig::configureStaticItems > > radiometricenable = on > > 13:53:49.347349 INFO MACI 001 MACConfig::configureStaticItems > > rtsthreshold = > > 0 > > 13:53:49.347360 INFO MACI 001 MACConfig::configureStaticItems aifs0 = > > 1 > > 13:53:49.347370 INFO MACI 001 MACConfig::configureStaticItems aifs1 = > > 1 > > 13:53:49.347379 INFO MACI 001 MACConfig::configureStaticItems aifs2 = > > 1 > > 13:53:49.347389 INFO MACI 001 MACConfig::configureStaticItems aifs3 = > > 0 > > 13:53:49.347404 INFO MACI 001 MACConfig::configureStaticItems > > channelactivityestimationtimer = 0.100000 sec > > 13:53:49.347434 INFO MACI 001 MACConfig::configureDynamicItems cwmax0 > > = 1024 > > 13:53:49.347448 INFO MACI 001 MACConfig::configureDynamicItems cwmax1 > > = 1024 > > 13:53:49.347461 INFO MACI 001 MACConfig::configureDynamicItems cwmax2 > > = 64 > > 13:53:49.347476 INFO MACI 001 MACConfig::configureDynamicItems cwmax3 > > = 16 > > 13:53:49.347489 INFO MACI 001 MACConfig::configureDynamicItems cwmin0 > > = 32 > > 13:53:49.347534 INFO MACI 001 MACConfig::configureDynamicItems cwmin1 > > = 32 > > 13:53:49.347550 INFO MACI 001 MACConfig::configureDynamicItems cwmin2 > > = 16 > > 13:53:49.347561 INFO MACI 001 MACConfig::configureDynamicItems cwmin3 > > = 8 > > 13:53:49.347570 INFO MACI 001 MACConfig::configureStaticItems > > distance = 1000 > > 13:53:49.347581 INFO MACI 001 MACConfig::configureDynamicItems > > enablepromiscuousmode = off > > 13:53:49.347591 INFO MACI 001 MACConfig::configureStaticItems > > flowcontrolenable = off > > 13:53:49.347602 INFO MACI 001 MACConfig::configureStaticItems > > flowcontroltokens = 10 > > 13:53:49.347611 INFO MACI 001 MACConfig::configureStaticItems mode = > > 0 > > 13:53:49.347621 INFO MACI 001 MACConfig::configureStaticItems msdu0 = > > 65535 > > 13:53:49.347631 INFO MACI 001 MACConfig::configureStaticItems msdu1 = > > 65535 > > 13:53:49.347641 INFO MACI 001 MACConfig::configureStaticItems msdu2 = > > 65535 > > 13:53:49.347650 INFO MACI 001 MACConfig::configureStaticItems msdu3 = > > 65535 > > 13:53:49.347661 INFO MACI 001 MACConfig::configureDynamicItems > > multicastrate = 1 > > 13:53:49.347671 INFO MACI 001 MACConfig::configureStaticItems > > neighbormetricdeletetime = 60.000000 sec > > 13:53:49.347683 INFO MACI 001 MACConfig::configureStaticItems > > neighbortimeout = 30.000000 sec > > 13:53:49.347694 INFO MACI 001 MACConfig::configureStaticItems > > queuesize0 = > > 255 > > 13:53:49.347703 INFO MACI 001 MACConfig::configureStaticItems > > queuesize1 = > > 255 > > 13:53:49.347712 INFO MACI 001 MACConfig::configureStaticItems > > queuesize2 = > > 255 > > 13:53:49.347721 INFO MACI 001 MACConfig::configureStaticItems > > queuesize3 = > > 255 > > 13:53:49.347731 INFO MACI 001 MACConfig::configureStaticItems > > radiometricreportinterval = 1.000000 sec > > 13:53:49.347741 INFO MACI 001 MACConfig::configureStaticItems > > retrylimit0 = 2 > > 13:53:49.347751 INFO MACI 001 MACConfig::configureStaticItems > > retrylimit1 = 2 > > 13:53:49.347760 INFO MACI 001 MACConfig::configureStaticItems > > retrylimit2 = 2 > > 13:53:49.347770 INFO MACI 001 MACConfig::configureStaticItems > > retrylimit3 = 2 > > 13:53:49.347780 INFO MACI 001 MACConfig::configureStaticItems txop0 = > > 0 > > 13:53:49.347789 INFO MACI 001 MACConfig::configureStaticItems txop1 = > > 0 > > 13:53:49.347799 INFO MACI 001 MACConfig::configureStaticItems txop2 = > > 0 > > 13:53:49.347809 INFO MACI 001 MACConfig::configureStaticItems txop3 = > > 0 > > 13:53:49.347819 INFO MACI 001 MACConfig::configureDynamicItems > > unicastrate = > > 4 > > 13:53:49.347828 INFO MACI 001 MACConfig::configureStaticItems > > wmmenable = off > > 13:53:49.348669 INFO PHYI 001 FrameworkPHY::configure: bandwidth = > > 20000000 Hz > > 13:53:49.348693 INFO PHYI 001 FrameworkPHY::configure: > > propagationmodel = freespace > > 13:53:49.348706 INFO PHYI 001 FrameworkPHY::configure: subid = 1 > > 13:53:49.348717 INFO PHYI 001 FrameworkPHY::configure: > > systemnoisefigure = > > 4.00 dB > > 13:53:49.348729 INFO PHYI 001 FrameworkPHY::configure: txpower = 0.00 > > dBm > > 13:53:49.348742 INFO PHYI 001 FrameworkPHY::configure: > > fixedantennagain = > > 0.00 dBi > > 13:53:49.348753 INFO PHYI 001 FrameworkPHY::configure: > > fixedantennagainenable = on > > 13:53:49.348763 INFO PHYI 001 FrameworkPHY::configure: frequency = > > 2347000000 Hz > > 13:53:49.348775 INFO PHYI 001 FrameworkPHY::configure: > > frequencyofinterest = > > 2347000000 Hz > > 13:53:49.348785 INFO PHYI 001 FrameworkPHY::configure: noisebinsize = > > 20 usec > > 13:53:49.348795 INFO PHYI 001 FrameworkPHY::configure: > > noisemaxclampenable = off > > 13:53:49.348804 INFO PHYI 001 FrameworkPHY::configure: > > noisemaxmessagepropagation = 200000 usec > > 13:53:49.348814 INFO PHYI 001 FrameworkPHY::configure: > > noisemaxsegmentduration = 1000000 usec > > 13:53:49.348823 INFO PHYI 001 FrameworkPHY::configure: > > noisemaxsegmentoffset = 300000 usec > > 13:53:49.348833 INFO PHYI 001 FrameworkPHY::configure: noisemode = > > all > > 13:53:49.348843 INFO PHYI 001 FrameworkPHY::configure: > > timesyncthreshold = > > 10000 usec > > 13:53:49.349549 INFO TRANSPORTI 002 VirtualTransport::configure address: > > 10.100.0.2 > > 13:53:49.349568 INFO TRANSPORTI 002 VirtualTransport::configure mask: > > 255.255.0.0 > > 13:53:49.349579 INFO TRANSPORTI 002 VirtualTransport::configure > > arpcacheenable: 1 > > 13:53:49.349589 INFO TRANSPORTI 002 VirtualTransport::configure > > arpmodeenable: 1 > > 13:53:49.349598 INFO TRANSPORTI 002 VirtualTransport::configure > > bitrate: 0 > > 13:53:49.349608 INFO TRANSPORTI 002 VirtualTransport::configure > > broadcastmodeenable: 0 > > 13:53:49.349618 INFO TRANSPORTI 002 VirtualTransport::configure device: > > emane0 > > 13:53:49.349627 INFO TRANSPORTI 002 VirtualTransport::configure > > devicepath: > > /dev/net/tun > > 13:53:49.349637 INFO TRANSPORTI 002 VirtualTransport::configure > > flowcontrolenable: 0 > > 13:53:49.350007 INFO MACI 002 MACConfig::configureStaticItems > > pcrcurveuri = > > file:///usr/share/emane/xml/models/mac/ieee80211abg/ieee80211pcr.xml > > 13:53:49.350031 INFO MACI 002 MACConfig::configureStaticItems > > radiometricenable = on > > 13:53:49.350043 INFO MACI 002 MACConfig::configureStaticItems > > rtsthreshold = > > 0 > > 13:53:49.350053 INFO MACI 002 MACConfig::configureStaticItems aifs0 = > > 1 > > 13:53:49.350063 INFO MACI 002 MACConfig::configureStaticItems aifs1 = > > 1 > > 13:53:49.350073 INFO MACI 002 MACConfig::configureStaticItems aifs2 = > > 1 > > 13:53:49.350083 INFO MACI 002 MACConfig::configureStaticItems aifs3 = > > 0 > > 13:53:49.350093 INFO MACI 002 MACConfig::configureStaticItems > > channelactivityestimationtimer = 0.100000 sec > > 13:53:49.350106 INFO MACI 002 MACConfig::configureDynamicItems cwmax0 > > = 1024 > > 13:53:49.350116 INFO MACI 002 MACConfig::configureDynamicItems cwmax1 > > = 1024 > > 13:53:49.350126 INFO MACI 002 MACConfig::configureDynamicItems cwmax2 > > = 64 > > 13:53:49.350136 INFO MACI 002 MACConfig::configureDynamicItems cwmax3 > > = 16 > > 13:53:49.350145 INFO MACI 002 MACConfig::configureDynamicItems cwmin0 > > = 32 > > 13:53:49.350155 INFO MACI 002 MACConfig::configureDynamicItems cwmin1 > > = 32 > > 13:53:49.350165 INFO MACI 002 MACConfig::configureDynamicItems cwmin2 > > = 16 > > 13:53:49.350174 INFO MACI 002 MACConfig::configureDynamicItems cwmin3 > > = 8 > > 13:53:49.350183 INFO MACI 002 MACConfig::configureStaticItems > > distance = 1000 > > 13:53:49.350193 INFO MACI 002 MACConfig::configureDynamicItems > > enablepromiscuousmode = off > > 13:53:49.350203 INFO MACI 002 MACConfig::configureStaticItems > > flowcontrolenable = off > > 13:53:49.350215 INFO MACI 002 MACConfig::configureStaticItems > > flowcontroltokens = 10 > > 13:53:49.350225 INFO MACI 002 MACConfig::configureStaticItems mode = > > 0 > > 13:53:49.350234 INFO MACI 002 MACConfig::configureStaticItems msdu0 = > > 65535 > > 13:53:49.350244 INFO MACI 002 MACConfig::configureStaticItems msdu1 = > > 65535 > > 13:53:49.350253 INFO MACI 002 MACConfig::configureStaticItems msdu2 = > > 65535 > > 13:53:49.350262 INFO MACI 002 MACConfig::configureStaticItems msdu3 = > > 65535 > > 13:53:49.350272 INFO MACI 002 MACConfig::configureDynamicItems > > multicastrate = 1 > > 13:53:49.350282 INFO MACI 002 MACConfig::configureStaticItems > > neighbormetricdeletetime = 60.000000 sec > > 13:53:49.350294 INFO MACI 002 MACConfig::configureStaticItems > > neighbortimeout = 30.000000 sec > > 13:53:49.350304 INFO MACI 002 MACConfig::configureStaticItems > > queuesize0 = > > 255 > > 13:53:49.350322 INFO MACI 002 MACConfig::configureStaticItems > > queuesize1 = > > 255 > > 13:53:49.350333 INFO MACI 002 MACConfig::configureStaticItems > > queuesize2 = > > 255 > > 13:53:49.350342 INFO MACI 002 MACConfig::configureStaticItems > > queuesize3 = > > 255 > > 13:53:49.350352 INFO MACI 002 MACConfig::configureStaticItems > > radiometricreportinterval = 1.000000 sec > > 13:53:49.350363 INFO MACI 002 MACConfig::configureStaticItems > > retrylimit0 = 2 > > 13:53:49.350372 INFO MACI 002 MACConfig::configureStaticItems > > retrylimit1 = 2 > > 13:53:49.350382 INFO MACI 002 MACConfig::configureStaticItems > > retrylimit2 = 2 > > 13:53:49.350391 INFO MACI 002 MACConfig::configureStaticItems > > retrylimit3 = 2 > > 13:53:49.350401 INFO MACI 002 MACConfig::configureStaticItems txop0 = > > 0 > > 13:53:49.350410 INFO MACI 002 MACConfig::configureStaticItems txop1 = > > 0 > > 13:53:49.350419 INFO MACI 002 MACConfig::configureStaticItems txop2 = > > 0 > > 13:53:49.350428 INFO MACI 002 MACConfig::configureStaticItems txop3 = > > 0 > > 13:53:49.350439 INFO MACI 002 MACConfig::configureDynamicItems > > unicastrate = > > 4 > > 13:53:49.350448 INFO MACI 002 MACConfig::configureStaticItems > > wmmenable = off > > 13:53:49.351231 INFO PHYI 002 FrameworkPHY::configure: bandwidth = > > 20000000 Hz > > 13:53:49.351258 INFO PHYI 002 FrameworkPHY::configure: > > propagationmodel = freespace > > 13:53:49.351271 INFO PHYI 002 FrameworkPHY::configure: subid = 1 > > 13:53:49.351282 INFO PHYI 002 FrameworkPHY::configure: > > systemnoisefigure = > > 4.00 dB > > 13:53:49.351293 INFO PHYI 002 FrameworkPHY::configure: txpower = 0.00 > > dBm > > 13:53:49.351304 INFO PHYI 002 FrameworkPHY::configure: > > fixedantennagain = > > 0.00 dBi > > 13:53:49.351314 INFO PHYI 002 FrameworkPHY::configure: > > fixedantennagainenable = on > > 13:53:49.351324 INFO PHYI 002 FrameworkPHY::configure: frequency = > > 2347000000 Hz > > 13:53:49.351335 INFO PHYI 002 FrameworkPHY::configure: > > frequencyofinterest = > > 2347000000 Hz > > 13:53:49.351345 INFO PHYI 002 FrameworkPHY::configure: noisebinsize = > > 20 usec > > 13:53:49.351354 INFO PHYI 002 FrameworkPHY::configure: > > noisemaxclampenable = off > > 13:53:49.351364 INFO PHYI 002 FrameworkPHY::configure: > > noisemaxmessagepropagation = 200000 usec > > 13:53:49.351375 INFO PHYI 002 FrameworkPHY::configure: > > noisemaxsegmentduration = 1000000 usec > > 13:53:49.351385 INFO PHYI 002 FrameworkPHY::configure: > > noisemaxsegmentoffset = 300000 usec > > 13:53:49.351395 INFO PHYI 002 FrameworkPHY::configure: noisemode = > > all > > 13:53:49.351406 INFO PHYI 002 FrameworkPHY::configure: > > timesyncthreshold = > > 10000 usec > > 13:53:49.352275 INFO NEMManagerImpl::configure controlportendpoint: > > 0.0.0.0:47000 > > 13:53:49.352375 INFO NEMManagerImpl::configure eventservicedevice: > > eth1 > > 13:53:49.352396 INFO NEMManagerImpl::configure eventservicegroup: > > 224.1.2.8:45703 > > 13:53:49.352407 INFO NEMManagerImpl::configure > > otamanagerchannelenable: on > > 13:53:49.352418 INFO NEMManagerImpl::configure otamanagerdevice: eth1 > > 13:53:49.352430 INFO NEMManagerImpl::configure OTA Manager Channel Group: > > 224.1.2.8:45702 > > 13:53:49.352443 INFO NEMManagerImpl::configure eventservicettl: 1 > > 13:53:49.352459 INFO NEMManagerImpl::configure otamanagerloopback: > > off > > 13:53:49.352508 INFO NEMManagerImpl::configure otamanagerttl: 1 > > 13:53:49.352527 INFO NEMManagerImpl::configure > > stats.event.maxeventcountrows: > > 0 > > 13:53:49.352547 INFO NEMManagerImpl::configure > > stats.ota.maxeventcountrows: 0 > > 13:53:49.352590 INFO NEMManagerImpl::configure > > stats.ota.maxpacketcountrows: > > 0 > > 13:53:49.355893 ABORT StartException: Platform OTA Manager: Unable to > > open OTA Manager socket: '224.1.2.8:45702'. > > > > Possible reason(s): > > * No Multicast device specified and routing table nondeterministic > > (no multicast route and no default route). > > * Multicast device eth1 does not exist or is not up. > > ioctl SIOCGIFADDR: No such device > > ^^^^^^^^^^^^^^^^^^^^^ > > > > So, I can see that I've misconfigured some things, but I'm not too > > sure which things, or how. Should I copy/paste my configuration files > > here? > > > > > > Thanks, > > Cem Karan > > > > --- > > Other than quoted laws, regulations or officially published policies, > > the views expressed herein are not intended to be used as an > > authoritative state of the law nor do they reflect official positions > > of the U.S. Army, Department of Defense or U.S. Government. > > > > > >> -----Original Message----- > >> From: Steven Galgano [mailto:sgalg...@adjacentlink.com] > >> Sent: Monday, February 05, 2018 12:43 PM > >> To: Karan, Cem F CIV USARMY RDECOM ARL (US) > >> <cem.f.karan....@mail.mil> > >> Cc: emane-users@nrl.navy.mil > >> Subject: Re: [Non-DoD Source] Re: [emane-users] Help understanding > >> 'platformendpoint' and 'transportendpoint' > >> > >> Cem, > >> > >> That doesn't look emane related, at least to start. Your containers > >> did not start with one of the reasons being the bridge emanenode0 was > >> not created. > >> > >> Do any of the emane-tutorial demos work for you? I would suggest > >> using the develop branch of the tutorial. > >> > >> -steve > >> > >> > >> On 02/05/2018 11:14 AM, Karan, Cem F CIV USARMY RDECOM ARL (US) wrote: > >>> It appears that EMANE is not running anywhere. Here is the log file > >>> output of the first container: > >>> > >>> lxc-execute 20180205153353.325 ERROR lxc_conf - > >>> conf.c:instantiate_veth:2736 - failed to attach 'veth1.1' to the > >>> bridge > >>> 'emanenode0': No such device > >>> lxc-execute 20180205153353.347 ERROR lxc_conf - > >>> conf.c:lxc_create_network:3029 - failed to create netdev > >>> lxc-execute 20180205153353.347 ERROR lxc_start - > >>> start.c:lxc_spawn:1103 - Failed to create the network. > >>> lxc-execute 20180205153353.347 ERROR lxc_start - > >>> start.c:__lxc_start:1358 - Failed to spawn container "node-1". > >>> > >>> When I checked for the PID that is logged in > >>> persist/host/var/run/emane.pid, it doesn't appear either on the > >>> host, or in any of the containers when I run 'ps -elf'. > >>> > >>> What else should I look for? Would looking at the configuration > >>> files help? > >>> > >>> Thanks, > >>> Cem Karan > >>> > >>> --- > >>> Other than quoted laws, regulations or officially published > >>> policies, the views expressed herein are not intended to be used as > >>> an authoritative state of the law nor do they reflect official > >>> positions of the U.S. Army, Department of Defense or U.S. Government. > >>> > >>> > >
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ emane-users mailing list emane-users@nrl.navy.mil https://publists.nrl.navy.mil/mailman/listinfo/emane-users