Celeron G550 2-core, 2.6GHz. ASUS P8H61-M LX2 R2.0 mATX 2x2Gb RAM DDR3 PC3-10600 -- no swap in BIOS turn off C1e, C3 and C6 no isolcpus=1 shows 5600 max jitter with isolcpus=1 -- 2400.
On Fri, Feb 22, 2013 at 6:59 AM, Matt Shaver <m...@mattshaver.com> wrote: > Can anyone recommend a motherboard that will run the standard 10.04 CD > install of linuxcnc? Latency-test results need to be respectable, but > software stepping ability is not a requirement. > > 1. This must be a motherboard I can buy today, new, with at least one > standard PCI slot. > > 2. Graphics can be onboard, provided it doesn't cause real-time > problems, or via a plug in, probably PCI-Express bus, adapter. > > 3. An IDE port would be a plus, but not required. > > 4. Inexpensive and reliable would be good too. > > 5. Mini-ITX is OK, provided it has the PCI slot and not PCI-E. > > 6. AMD is OK too, if anyone's got experience there. > > I 'm making this seemingly bizarre request because the motherboards > currently used by one of my clients have become unavailable, and all > the new ones similar to it are for Sandy Bridge CPUs. One unit bought > for testing won't boot the 2.6.32-122 kernel and from reading the > internet I understand that 2.6.35 (.37?) or later is required for Sandy > Bridge systems. > > Changing the kernel and making a new disk image is possible, but I'd > like to introduce as little change as possible right now. Of course, > soon we'll have wonderful little ARM computers that we can use, but > that is not yet. Close, just not today. > > Thanks, > Matt > > > ------------------------------------------------------------------------------ > Everyone hates slow websites. So do we. > Make your web apps faster with AppDynamics > Download AppDynamics Lite for free today: > http://p.sf.net/sfu/appdyn_d2d_feb > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > ------------------------------------------------------------------------------ Everyone hates slow websites. So do we. Make your web apps faster with AppDynamics Download AppDynamics Lite for free today: http://p.sf.net/sfu/appdyn_d2d_feb _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
