On 05/11/2014 11:01 AM, tuxcnc wrote: > Write to him and do not forget to share with us the > information obtained. Mssr. Rible sent a .so file and also the whole source to build it from. I did so, but had to add a couple dependencies for -dev packages. Then it built, and the util.crop function was available. Zooming in by about 2 or 3:1 seems to give reasonable resolution. It is apparently using jpg compression in the path so that the original camera pixels are not obvious. But, it works. I bored out my adapter to 1/2" so the 11mm camera has enough clearance to be moved on center, and then tweaked the setscrews to get it centered well. I'd say it will probably be at least as accurate as an import edge finder. I never totally trusted those things, anyway, as I never understood how they worked.
The convert_crop.so file is at http://pico-systems.com/codes/convert_crop.so This is only for 10.04 Ubuntu LinuxCNC systems, as far as I know. Copy the file to /usr/lib/camunits Jon ------------------------------------------------------------------------------ Is your legacy SCM system holding you back? Join Perforce May 7 to find out: • 3 signs your SCM is hindering your productivity • Requirements for releasing software faster • Expert tips and advice for migrating your SCM now http://p.sf.net/sfu/perforce _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
