i'm happy to help Neil
On 25 December 2015 at 20:00, Neil Whelchel <neilwhelc...@gmail.com> wrote: > Hello all, > First of all, this is a really fantastic bunch of people here! I can't > think of any other mail list where everyone that has replied so far makes > sense and provides directly useful insight. > I realize that maintaining an embedded OS is not easy, and expensive. I > have been doing this since 1993, and I have focused specifically on the X86 > (replaced by the AMD64), and ARM builds. > I have built a board around the Allwell A20 that has the same FPGA as used > on the Mesa 5i24 on the board as well as open drain drivers and input > conditioning and protection. At some point, I might decide to make a box, > and HMI to go with it, but for now it is just a board. > I have also made a number of changes to Gmoccapy to make it embedded > friendly, and so far it is working quite well. > The point is that I am already standing at this doorstep, and I am opening > the discussion as to what the best way is for me to contribute both the > changes to Linuxcnc and the embedded OS, and possibly collect some support > along the way. > -Neil- > > > > On Fri, Dec 25, 2015 at 10:32 AM, Sarah Armstrong < > sarahj.armstron...@gmail.com> wrote: > > > I'm Available ! > > ( glad this is not an open group Gene ) LOL > > I'd probably have a queue around the block . > > > > > > > > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-developers > -- The information contained in this message is confidential and is intended for the addressee only. If you have received this message in error or there are any problems please notify the originator immediately. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving the RcTechnix network. RcTechnix will not be liable for direct, special, indirect or consequential damages arising from alteration of the contents of this message by a third party or as a result of any virus being passed on. RcTechnix reserves the right to monitor and record e-mail messages being sent to and from this address for the purposes of investigating or detecting any unauthorised use of its system and ensuring effective operation. (c) RcTechnix ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
