Am 20.10.2016 um 17:39 schrieb andy pugh: > On 20 October 2016 at 15:54, tero.kaarl...@eka-sorvaus.fi > <turo.kaarl...@co.inet.fi> wrote: >> Might this be a bug? If I try to restart a program with tool changes from >> certain line. Machine goes to tool change position and goes thru(changes) >> all tools prior the tool needed for that line and after that starts running >> program from line wanted. I am running 2.8 and machine has ATC. GUI is >> gmoccapy. > That's probably better than the alternative of running from line with > whatever tool happens to be in the spindle. But I don't think that it > has always done that. > This might be a Gmoccapy thing. I have the impression that there are > quite a few features built-in to Gmoccapy that probably really belong > in the base software. > Hallo Andy,
you are right, i included some specials in gmoccapy, but the run from line stuff is a pure linuxcnc base stuff. I strongly recommend not to use run from line in linuxcnc, as it does not take care of every "code" in front of the line you start from. In previous versions not even the tool change had been considered, that is the reason why I diabled by default the run from line in gmoccapy. I have not checked on the recent master, if that has been changed, does the machine start with correct feed and speed and coolnat option? Norbert ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
