Hi, At a former employer (EU Notified Body based in Germany), we were told to ignore "normal" LED's, unless when looking into them they looked "Dazzling". The rational was that the requirement was going to be changed to exempt them and there was no sense in enforcing it.
Ned Devine Entela, Inc. Program Manager III Toll Free: 1 800 888 3787 Ext. 671 Direct: 1 616 248 9671 Fax: 1 616 574 9752 e-mail: [email protected] -----Original Message----- From: Crabb, John [mailto:[email protected]] Sent: Friday, November 20, 1998 4:26 AM To: 'Frank West'; 'EMC-PSTC Mailing List' Subject: RE: LED Reqs under A11 to EN60950 I would also be interested to know what everyone is doing (or not doing !!). As far as I can gather, everyone is ignoring this issue, as it is just so ridiculous. After all, the only way you can prove that a LED is Class 1 or below is to do the measurements - and I'm sure most of us don't have the equipment to do this. (or the time, or the inclination). John Crabb, Product Safety Engineer, NCR Financial Solutions Group Ltd, Dundee, Scotland. --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators). --------- This message is coming from the emc-pstc discussion list. To cancel your subscription, send mail to [email protected] with the single line: "unsubscribe emc-pstc" (without the quotes). For help, send mail to [email protected], [email protected], [email protected], or [email protected] (the list administrators).
