Hi,

I don't think it would matter if you did the water first or the
petroleum spirit.  

Note:  for petroleum spirit we use n-Hexane 95+%, not kerosene or gas.

Ned Devine
Entela, Inc.
Program Manager III

Toll Free:      1 800 888 3787 Ext. 671
Direct:         1 616 248 9671
Fax:            1 616 248 0591
e-mail:         [email protected]



> ----------
> From:         Crabb, John[SMTP:[email protected]]
> Reply To:     Crabb, John
> Sent:         Tuesday, July 14, 1998 6:37 AM
> To:   '[email protected]'; [email protected];
> [email protected]; [email protected]
> Subject:      RE: RE: isopropyl alcohol 
> 
> The requirements in 1.7.15 of UL 1950 are : -
> Compliance is checked by inspection and by rubbing the marking by hand
> for
> 15 s with a piece of cloth soaked with water and again for 15 s with a
> piece
> of cloth soaked with petroleum spirit. After this test, the marking
> shall be
> legible; it shall not be possible to remove marking plates easily and
> they
> shall show no curling.
> The petroleum spirit to be used for the test is aliphatic solvent
> hexane
> having a maximum aromatics content of 0.1% by volume, a kauri-butanol
> value
> of 29, an initial boiling point of approximately 65EC, a dry point of
> approximately 69EC and a mass per unit volume of approximately 0.7
> kg/l.
> 
> My recollection is that the sentence beginning "the petroleum spirit"
> was
> added to CLARIFY
> exactly what should be used.
> 
> It has been suggested to me that doing the test EXACTLY as specified
> is less
> severe 
> than just rubbing with petrol (gas to you). i.e. rubbing with water
> leaves a
> film of water,
> followed by rubbing with petrol.
> 
> We use a UL Recognized Printing Materials system (PGJI2), where the
> combination of 
> label stock, ink ribbon, and printer gives you a label which satisfies
> UL
> requirements.
> We use a system from Donprint, which also is CSA Certified, and we
> have
> NEVER had 
> UL or CSA carry out any tests.
> 
> As an aside, one of the advantages of buying UL 1950 on disc is that
> you
> could copy
> the above extract and insert it in an e-mail such as this, rather than
> typing it out.  
> 
> John Crabb, Product Safety
> NCR Financial Solutions Group Ltd, Dundee, Scotland.
> 

Reply via email to