Dear All, Last year I had an ITE product for use in vehicles Listed under UL1950.
At 13:11 15/06/2000 -0500, Loop, Robert wrote: > >Cyril: > >I don't believe there is a safety (UL) requirement for ITE equipment that >will be installed in a vehicle. > >I have been writing a test plan for a customer that requires extensive >testing to SAE J1455 and J1113 and there is no "safety" involved. It is >basically environmental, transient voltage, immunity and emissions based >testing. > >If you need more specifics on individual tests contained in those two >standards, please contact me directly. > >Sincerely, >Robert Loop >Engineering Supervisor >Wyle Laboratories >Product Safety >ph - (256) 837-4411 x313 >fax- (256) 721-0144 >e-mail: rl...@hnt.wylelabs.com > > >> ---------- >> From: Binnom, Cyril A[SMTP:binno...@ems-t.com] >> Reply To: Binnom, Cyril A >> Sent: Thursday, June 15, 2000 10:23 AM >> To: emc-pstc >> Subject: SAE testing >> >> >> Group, >> >> I have an In-Vehicle Computer (ITE equipment) that will be implemented >> into >> heavy duty trucks. I am unfamiliar with SAE requirements and only have >> been >> told that I will have to be compliant to J1455. I am looking for some >> clarification on if this is the correct standard, (if it is not then what >> is) and if this is a compliance issue that has to be addressed or if >> testing >> is a matter of choice. >> >> Thank you in advance for your help >> >> Cyril A. Binnom Jr. >> EMI/EMC Approvals Engineer >> (770) 447-4224 Ext.3240 >> (770) 447-6928 Fax >> e-mail binno...@lxe.com >> >> Visit Our Website at: >> http://www.lxe.com >> >> >> ------------------------------------------- >> This message is from the IEEE EMC Society Product Safety >> Technical Committee emc-pstc discussion list. >> >> To cancel your subscription, send mail to: >> majord...@ieee.org >> with the single line: >> unsubscribe emc-pstc >> >> For help, send mail to the list administrators: >> Jim Bacher: jim_bac...@mail.monarch.com >> Michael Garretson: pstc_ad...@garretson.org >> >> For policy questions, send mail to: >> Richard Nute: ri...@ieee.org >> >> > >------------------------------------------- >This message is from the IEEE EMC Society Product Safety >Technical Committee emc-pstc discussion list. > >To cancel your subscription, send mail to: > majord...@ieee.org >with the single line: > unsubscribe emc-pstc > >For help, send mail to the list administrators: > Jim Bacher: jim_bac...@mail.monarch.com > Michael Garretson: pstc_ad...@garretson.org > >For policy questions, send mail to: > Richard Nute: ri...@ieee.org > > Peter Merguerian Managing Director Product Testing Division I.T.L. (Product Testing) Ltd. Hacharoshet 26, POB 211 Or Yehuda 60251, Israel Tel: 972-3-5339022 Fax: 972-3-5339019 e-mail: pmerguer...@itl.co.il website: http://www.itl.co.il ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: jim_bac...@mail.monarch.com Michael Garretson: pstc_ad...@garretson.org For policy questions, send mail to: Richard Nute: ri...@ieee.org
