Just to add a little to this... Make sure UL1950 is 3d edition... And I don't believe Clause 6 applies since you don't direct to the PSTN. Thus, no FCC Part 68 either.
Don't forget about EN 55 022 and EN 55 024 if you're selling in the EU. Check with the lab that you'll use for testing for more info. HTH John -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Wednesday, May 10, 2000 15:26 To: [email protected]; [email protected] Subject: RE: Network Card Certification Safety: UL1950 US EN/IEC60950 International FCC CFR 47 Part 15: Class B residential or Class A (industrial) Re: FCC "FCC logo" for Class B is self-certified but you must test in the PC configuration specified in Part 15; EUT includes monitor, keyboard, mouse, serial device and printer. Be sure all items are Class B before you test your card. Class B requires careful circuit layout and component choice for most network technologies. Re: safety If RJ jack, mark the port with the "telephone-banned" logo or print a lengthy message (for data only) near the port. 'For data only' does not translate well into French. david ______________________________ Reply Separator _________________________________ Subject: Network Card Certification Author: "Dan Mitchell" <SMTP:[email protected]> at ADEMCONET List-Post: [email protected] Date: 5/10/2000 11:54 AM I have a possible project where I will have to get a PC Network Card Safety certified. As it is used in a PC, I would assume that it will fall under UL1950. Since the card does not directly connect to a phone line, (it would go through a server and then to a phone line) I was wondering if Clause 6 Connection to Telecommunication Networks would apply. Additionally, I would like to know what FCC requirements must be met. Any other information would be greatly appreciated. Dan Mitchell Condor DC Power Supplies ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Jim Bacher: [email protected] Michael Garretson: [email protected] For policy questions, send mail to: Richard Nute: [email protected]
