OK - Lets settle if for all of you young folk. The 80/80 rule originated in VDE 0871/6.78, section 4.1.4.
Regards, John Shinn, P.E. Manager, Lab. Operations Sanmina -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Lou Guerin Sent: Tuesday, November 13, 2001 8:45 AM To: 'Chris Maxwell'; David Heald; [email protected] Subject: RE: 80/80 rule for euro compliance? Chris, David, I just checked CISPR 22:1997 and this shows up in Section 7.1.2, they go into quite a bit of detail. Regards, Lou Guerin Littlefeet, Inc. www.littlefeet-inc.com -----Original Message----- From: Chris Maxwell [mailto:[email protected]] Sent: Tuesday, November 13, 2001 5:21 AM To: David Heald; [email protected] Subject: RE: 80/80 rule for euro compliance? I have seen this in Section 6 of EN 55011:1990 Section 8 of EN 55022:1995 I'm not sure if there are any plans to remove these references from newer versions of these standards. Best regards, Chris > -----Original Message----- > From: David Heald [SMTP:[email protected]] > Sent: Monday, November 12, 2001 3:59 PM > To: [email protected] > Subject: 80/80 rule for euro compliance? > > > Greetings all, > I remember hearing somewhere (& it seems that I found the answer > somewhere but I can't remember) that there is a stipulation for > European > compliance that one should have 80% certainty that 80% of one's > products > are compliant. I have no idea where this idea originally came from or > what standards it may apply to. > > Can anyone out there help me out? > > Dave > > ------------------------------------------- > This message is from the IEEE EMC Society Product Safety > Technical Committee emc-pstc discussion list. > > Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ > > To cancel your subscription, send mail to: > [email protected] > with the single line: > unsubscribe emc-pstc > > For help, send mail to the list administrators: > Michael Garretson: [email protected] > Dave Heald [email protected] > > For policy questions, send mail to: > Richard Nute: [email protected] > Jim Bacher: [email protected] > > All emc-pstc postings are archived and searchable on the web at: > No longer online until our new server is brought online and the > old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
