Robert, I don't have the answer, but if you review Article 500 of the National Electric Code (NEC) and UL's website you may be enlightened.
http://www.ul.com/hazloc/ Best Regards, Jody Leber Laboratory Manager [email protected] http://www.ustech-lab.com U. S. Technologies 3505 Francis Circle Alpharetta, GA 30004 770.740.0717 Fax: 770.740.1508 -----Original Message----- From: Loop, Robert [SMTP:[email protected]] Sent: Thursday, March 15, 2001 11:13 AM To: [email protected] Subject: Class I Division 1 versus Class I Division 2 Hello Group, I need some education on Classified/Hazardous locations. What is the difference between a product that is certified to Class I Division 1 versus Class I Division 2? If I had a product that was certified to Division 2, what would be needed to make it pass Division 1 requirements? I apologize for my ignorance, there are simply too many standards out there and this is out of my league. Sincerely, Robert Loop Engineering Supervisor Wyle Laboratories Product Safety ph - (256) 837-4411 x313 fax- (256) 721-0144 e-mail: [email protected] ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall," ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: [email protected] Dave Heald [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://www.rcic.com/ click on "Virtual Conference Hall,"
