We manufacture both Class A (ITE) and Class B (short range radio) devices and treat margins equally.
Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: Stone, Richard A (Richard) [mailto:rsto...@lucent.com] Sent: Wednesday, December 19, 2001 8:06 AM To: 'Gary McInturff'; Doug McKean; EMC-PSTC Discussion Group Subject: RE: EMI guard bands Does anyone make Class A AND Class B products? if so, do you allow for a much smaller margin on the B since its approx. 10 db quieter than A to start with. or do you treat them equally. Also Oats site to Oats site can differ as much as +/- 4 db do to many factors. any comments? Richard, -----Original Message----- From: Gary McInturff [mailto:gary.mcintu...@worldwidepackets.com] Sent: Tuesday, December 18, 2001 1:19 PM To: Doug McKean; EMC-PSTC Discussion Group Subject: RE: EMI guard bands I hold with the 3 db under class B, as well as A. The only effective argument, in my mind, is the uncertainty of measurement issue. Beyond that I find that if I have 3 db everywhere my measurements next time down with that product or with one off the shelf have also been compliant. So if pragmatic repeated measurements is telling me I'm in then I am not going to spend the time and money to make even more sure that I am in. The goal is to not interfere with communications not to be invisible at all costs. If it ain't broke I'm not fixing it. Obviously, others disagree. By the way if a customer requests it, they get what they want, if they want to pay for it, and I have never rejected products with a 3 db band - and they haven't bitten me yet either. My couple cents Gary -----Original Message----- From: Doug McKean [mailto:dmck...@auspex.com] Sent: Monday, December 17, 2001 3:15 PM To: EMC-PSTC Discussion Group Subject: Re: EMI guard bands "Tania Grant" wrote: > > Amund, > > My minimum criteria and recommendation has always been at least 6dB. > However, how many engineering managers, upon finding a 1.5 dB margin in > their favor, rule "ship it"! <nod> Although in some markets, there are customers who require -6dB under the Class A limit. Although if I had it my way, I'd make it about -10dB under the limit. - Doug McKean ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
