Hello, As you probably know the mains voltage for Japan is 100V. For safety we are testing up to - 10%: 90 V. However for some situations in Japan , it seems you can even expect 85 V. So we are planning to define a general rule that a product for Japan must handle 85 V. Is this low voltage rule known or common use in your company?
best regards, Van Compernolle Eric Reliability Manager Barco Projection Systems Noordlaan 5 8520 Kuurne Phone:+32 56 368 373 Fax:+32 56 368 355 mailto:eric.vancomperno...@barco.com http://www.barco.com > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"