If you choose to apply standards, then each of every unit placed on the market or into distribution after the DOW of 2001-07-01 must comply with EN55024 and this must be stated on a new DoC. Re-testing is only required if a requirement of the new standard differs from the old standard and the requirement is applicable to your product.
Richard Woods Sensormatic Electronics Tyco International -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Thursday, February 14, 2002 8:53 AM To: [email protected] Subject: Existing EN50082-1 approved products Hi All, As we all know, I hope, EN55024 came into effect on July 1, 2001, and superceded EN50082-1. If a product was legally being sold in the EU, before that date, and was compliant to EN50082-1, does the product need to be re-tested to EN55024 to be sold after that date, if there are no changes to that product, i.e. is a declaration to EN50082-1 still legal? Regards Doug Beckwith ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
