Kris and Peter,
The control number that you refer to can not at this time be used in lieu of a company identifier (name, file number, trademark). A UL Listed product must be marked to identify the Listee whose name appears in UL's database. The Listee's identification must consist of the company name (or an important portion thereof), trade name, trademark or the Listee's file number. I hope this helps clear this up. Regards, Scott Wourms Staff Engineer Underwriters Laboratories 2600 NW Lake Rd Camas, WA 98607-8542 Tel: +1 (360) 817 - 5737 Fax: +1 (360) 817 - 6156 Email: [email protected] Kris - I had enquired about use of the Listing Mark Control Number as a company ID some years ago and was told that it was unacceptable and that some other marking was required for traceability. Do you have this in writing from UL? Regards, Peter L. Tarver, PE Product Safety Manager Sanmina-SCI Homologation Services San Jose, CA [email protected] From: Carpentier Kristiaan To avoid (the cost of) multiple listing: The UL file number does not have to be placed on the product. There is no reference to the manufacturer required anywhere on the product. UL assigns a control number to your Listing mark. This control number is proprietary with UL and not available to anyone unless. It is for their use only. Of course, some-one who has lots of time may compare this controlnumber between different products and finally makes a link to the UL filenumber of the listee. Regards, Kris -- For more information about UL, its Marks, and its services for EMC, quality registrations and product certifications for global markets, please access our web sites at http://www.ul.com and http://www.ulc.ca, or contact your local sales representative. -- ********* Internet E-mail Confidentiality Disclaimer ********** This e-mail message may contain privileged or confidential information. If you are not the intended recipient, you may not disclose, use, disseminate, distribute, copy or rely upon this message or attachment in any way. If you received this e-mail message in error, please return by forwarding the message and its attachments to the sender. Underwriters Laboratories Inc. and its affiliates do not accept liability for any errors, omissions, corruption or virus in the contents of this message or any attachments that arise as a result of e-mail transmission. ***************************************************************** ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
