Consider the insulation construction for an external interconecting cable connected to secondary hazardous circuits of ITE (EN60950). Is it permissible for the reinforced insulation to be constructed of two layers (e.g., conductor insulation plus external jacket) if the total thickness is at least 0.4 mm? Clause 2.2.1 appears to allow it; however, clause 2.9.4.2 appears to indicate that layered insulation can only be used internally.
Richard Woods Sensormatic Electronics Tyco International ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: emc-p...@hypercom.com Dave Heald: davehe...@attbi.com For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"