I sure would love to hear that argument. Richard Woods Sensormatic Electronics Tyco International
-----Original Message----- From: Warren Birmingham [mailto:[email protected]] Sent: Friday, October 11, 2002 6:06 PM To: [email protected] Subject: Re: LED's and laser safety? Gary, I was recently in conversation with UL about LEDs whereas I am now being told that UL has convinced the European counterparts that LEDs are no longer considered Class I Lasers and the requirements for them to be tested as such has been dropped. UL no longer treats them that way in their CB Reports. Warren Birmingham Epsilon-Mu Consultants (510) 793-4806 email: [email protected] website: http://www.epsilon-mu.com On Thursday, Oct 10, 2002, at 08:53 US/Pacific, Gary McInturff wrote: > > IEC-825 has incorporated LED's into the safety standard but, from > what I can tell, left a great deal of confusion. > I typically deal with the 5 - 10 mcd devices and haven't been > required to provide any IEC-825 conformity proof for the Western > European test house. We may be jumping up to about 60 mcd and > non-focused devices and I don't know where the standard starts to > become concerned. I hate to buy the standard if it doesn't provide any > clarity for these types of parts. > Could you folks clue me in? > Gary > ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
