I think the original generic EN 50082-2 had a requirement for pulsed immunity testing to ENV 50204. Someone with more knowledge correct me if I'm wrong, but I seem to remember something about this being a knee-jerk reaction to GSM. Subsequently the usual 80%AM of 61000-4-3 was found/believed to be more invasive.
Dave Graham. -----Original Message----- From: [email protected] [mailto:[email protected]]On Behalf Of Chris Chileshe Sent: 30 September 2002 08:59 To: [email protected] Subject: RE: RADIATED IMMUNITY TESTING ABOVE 1GHz Ian wrote .. >> > I believe the generic standard EN61000-6-2 refers to >> > testing using pulsed modulation at 900MHz only. to which John replies .. > I can't find any mention of that in EN 61000-6-2. Agreed. I test to EN 61000-6-2 and I have never come across this requirement. I have just been re-reading BS EN 61000:6-2:1999 and I still can't find this requirement. Was this an error on the part of the originator in which case I can rest assured my test results and DoCs are valid? Regards - Chris ________________________________________________________________________ This e-mail has been scanned for all viruses by Star Internet. The service is powered by MessageLabs. For more information on a proactive anti-virus service working around the clock, around the globe, visit: http://www.star.net.uk ________________________________________________________________________ ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
