Chris,
It sounds like you are referring to ENV 50204:1995, which simulates a
digital radio telephone transmitting close to the equipment under test
(EUT). This test is performed at a single frequency between 895MHz and
905MHz, keyed on and off at 200Hz with a 50% duty cycle.
The only standards that I have seen that call for ENV 50204 are:
* EN 50082-1:1997, for generic residential/commercial/light industrial
apparatus, calls for ENV 50204 to be performed at 3V/m under the
enclosure port tests in Table 1.
* EN 50082-2:1995, for generic industrial apparatus, calls for ENV
50204 to be performed at 10V/m under the enclosure port tests in
Table 1.
EN 50082-1:1997 may be used until July 1, 2004, when EN 61000-6-1:2001
takes over as the generic immunity standard for residential/commercial/
light industrial apparatus.
EN 50082-2:1995 was replaced by EN 61000-6-2:1999 on April 1, 2002 as
the generic immunity standard for industrial apparatus.
John Barnes KS4GL
dBi Corporation
http://www.dbicorporation.com/
-------------------------------------------
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
All emc-pstc postings are archived and searchable on the web at:
http://ieeepstc.mindcruiser.com/
Click on "browse" and then "emc-pstc mailing list"
