Everybody Does anyone know whether it is necessary to perform radiated immunity tests above 1GHz when applying BS EN61326 which is the product standard titled "Electrical equipment for measurement, control and laboratory use - EMC requirements"? The products concerned are not telecom or IT devices. The standard refers to IEC 61000-4-3 for this testing which includes tests above 1GHz at various mobile telephone frequencies. I believe the generic standard EN61000-6-2 refers to testing using pulsed modulation at 900MHz only. Thanks Ian Gordon
_____________________________________________________________________ This e-mail has been scanned for viruses by the WorldCom Internet Managed Scanning Service - powered by MessageLabs. For further information visit http://www.worldcom.com ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
