We also have come up with a simple way to test our ESD gun, but it requires the help from our lab assistant (lab managers work good too).
First, have them take off their shoes and socks and stand on the Ground Reference Plan. Have them wet their fingers and grab the end of the ESD gun. Crank up the gun to 16.5KV single shot and let them have it. If the ESD gun is working properly, they will fall to the floor quivering slightly. Then they will wet their pants and forget who they are for about 25 to 30 minutes. Keep in mind that this method is not yet approved by A2LA or NAVLAP. Have fun, Brian ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
