We looked at the unit and almost purchased one. However, we discovered the annual cost to ship it back to Belgium + the calibration costs amounted to almost 78% of the purchase price. It just was not economical. If someone in the USA could calibrate it at lower cost it's a great product. Michael Taylor Still shoveling snow in Colorado
-----Original Message----- From: Kevin Harris [mailto:[email protected]] Sent: Monday, February 25, 2002 7:59 AM To: '[email protected]'; [email protected] Subject: RE: ESD Generator confidence test Vic, A couple of years back at the Seattle IEEE EMC show a go/ no go confidence tester for static testing was discussed and demonstrated. I'm not sure if that still is commercially available but if you email Ivan Hendrikx at [email protected] he will be able to tell you more I'm sure. Best Regards, Kevin Harris Manager, Approval Services Digital Security Controls 3301 Langstaff Road Concord, Ontario CANADA L4K 4L2 Tel: +1 905 760 3000 Ext. 2378 Fax +1 905 760 3020 Email: [email protected] -----Original Message----- From: [email protected] [mailto:[email protected]] Sent: Monday, February 25, 2002 9:00 AM To: [email protected] Subject: ESD Generator confidence test The ESD standard IEC 61000-4-2 gives details for the manufacture of a current target, used for verifying the ESD waveform. I appreciate this could be used as a confidence check before administering the test, but does anyone have another approach that they would be willing to share. Many thanks Vic Gibling EMC Engineer Raytheon Systems Limited ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list" ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] All emc-pstc postings are archived and searchable on the web at: http://ieeepstc.mindcruiser.com/ Click on "browse" and then "emc-pstc mailing list"
