Hi Folks
The basic answers to the questions of which items of "medical" equipment
are, and are not, required to be compliant to 60601 are given in EN
60601-1-1 "Medical electrical equipment Part 1-1: General requirements for
safety. Collateral standard: Safety requirements for medical electrical
systems"
This describes the requirements and has diagrams to illustrate the various
combinations of 60601 and non-60601 equipments.
Regards
John Allen
Technical Consultant
Safety and Risk Management
ERA Technology Ltd
Cleeve Rd
Leatherhead
Surrey KT22 7SA
Tel: +44 (0) 1372-367025 (Direct)
+44 (0) 1372-367000 (Switchboard)
Fax: +44 (0) 1372-367102 (Fax)
From: Han, Delphina [mailto:[email protected]]
Sent: 19 February 2003 17:10
To: [email protected]
Subject: IEC 61010 requirements
Hi
I am trying to find out safety requirements for devices that control and
monitor equipment in a hospital lab (used for pathology). Does it fall under
the IEC 61010 standard? If so, are there any requirements for use of
isolation transformers in that standard?
Thanks in advance for your response!
-Delphina
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
_____________________________________________________________________
This e-mail has been scanned for viruses by the WorldCom Internet Managed
Scanning Service - powered by MessageLabs. For further information visit
http://www.worldcom.com
*************************************************************************
Copyright ERA Technology Ltd. 2002. (www.era.co.uk). All rights reserved.
The information supplied in this Commercial Communication should be treated
in confidence.
No liability whatsoever is accepted for any loss or damage
suffered as a result of accessing this message or any attachments.
_____________________________________________________________________
This e-mail has been scanned for viruses by the WorldCom Internet Managed
Scanning Service - powered by MessageLabs. For further information visit
http://www.worldcom.com
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
