Hi Folks Most of the replies so far seem to indicate the use of "permanent" adhesives - which means the thermocouples could be difficult to remove and re-use.
Therefore, since these items tend to be too expensive to be considered as "throw-away" items, does any one have suggestions for adhesives which wil stick reasonably well but will then allow the thermocouples to be removed fairly easily and without damage? Regards John Allen ERA Technology Ltd From: Constantin Bolintineanu [mailto:[email protected]] Sent: 22 April 2003 15:22 To: 'Ned Devine'; IEEE EMC/Product Safety (IEEE, EMC/Product Safety) Subject: RE: Thermocouple glue I am using LOCTITE 416 - Net wt. 1 OZ.(Part No. 41650) along with the LOCTITE ACCELERATOR 7452 (Part No. 18637) net. WT.0.70 OZ and works well for Thermocouples AWG 30. (5-8 seconds) Respectfully yours, Constantin Constantin Bolintineanu P.Eng. DIGITAL SECURITY CONTROLS LTD. 3301 LANGSTAFF Road, L4K 4L2 CONCORD, ONTARIO, CANADA e-mail: [email protected] Telephone: 905 760 3000 ext 2568 Fax: 905 760 3020 DISCLAIMER: This e-mail message may contain privileged or confidential information. If you are not the intended recipient, you may not disclose, use, disseminate, distribute, copy or rely upon this message or attachment in any way. If you received this e-mail message in error, please return the message and its attachments to the sender, and then please delete from your system without copying or forwarding it or call DSC at 905 760 3000 extension 2568 so that the sender's address records can be corrected. From: Ned Devine [mailto:[email protected]] Sent: Wednesday, April 16, 2003 9:11 AM To: IEEE EMC/Product Safety (IEEE, EMC/Product Safety) Subject: Thermocouple glue Hi, In the past I have used Henkel Sicomet 77 to adhere thermocouples. I just tried to reorder some and was told it has been discontinued. Does anyone have a recommendation on a replacement? Thanks Ned Devine Entela, Inc. 3033 Madison Ave. SE Grand Rapids, MI 49548 Phone: 616 248 9671 Fax: 616 574 9752 e-mail: [email protected] www.entela.com Entela, Inc. A Certified Woman Owned Business This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc _____________________________________________________________________ This e-mail has been scanned for viruses by the WorldCom Internet Managed Scanning Service - powered by MessageLabs. For further information visit http://www.worldcom.com ************************************************************************* Copyright ERA Technology Ltd. 2003. (www.era.co.uk). All rights reserved. The information supplied in this Commercial Communication should be treated in confidence. No liability whatsoever is accepted for any loss or damage suffered as a result of accessing this message or any attachments. _____________________________________________________________________ This e-mail has been scanned for viruses by the WorldCom Internet Managed Scanning Service - powered by MessageLabs. For further information visit http://www.worldcom.com This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
