We use and sell (conflict alert) the same thermocouple paste I used when I worked at UL (the brown stuff - doesn't seem to have another name except thermocouple paste) - see our web site www.productsafeT.com. Appears to have good thermal conductivity while having low electrical conductivity (when dry). Also, after the test you can usually break off the old paste from the thermocouple without damaging the thermocouple bead. No mixing - comes mixed - but for those of you who use this stuff know, it can dry/harden quickly if you leave the lid off the container.
Bill Bisenius ED&D [email protected] From: Ned Devine [mailto:[email protected]] Sent: Wednesday, April 16, 2003 9:11 AM To: IEEE EMC/Product Safety (IEEE, EMC/Product Safety) Subject: Thermocouple glue Hi, In the past I have used Henkel Sicomet 77 to adhere thermocouples. I just tried to reorder some and was told it has been discontinued. Does anyone have a recommendation on a replacement? Thanks Ned Devine Entela, Inc. 3033 Madison Ave. SE Grand Rapids, MI 49548 Phone: 616 248 9671 Fax: 616 574 9752 e-mail: [email protected] www.entela.com Entela, Inc. A Certified Woman Owned Business This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: [email protected] with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Ron Pickard: [email protected] Dave Heald: [email protected] For policy questions, send mail to: Richard Nute: [email protected] Jim Bacher: [email protected] Archive is being moved, we will announce when it is back on-line. All emc-pstc postings are archived and searchable on the web at: http://www.ieeecommunities.org/emc-pstc
