Ned (and group),
We have have found that Loctite 382 adhesive and Loctite 7455 activator
is quite useful for attaching thermocouples. We buy the two together in
a 'Tak pak' as its called by Loctite, which is a kit of the adhesive and
activator which is primarily intended for wire tacking and component
mounting.
I believe that this is a Cyanoacrylate adhesive. When used with the
activator it sets very quickly - ideal when you are attaching lots of
thermocouples.
Hope this helps..
Regards,
Duncan.
Duncan Hobbs, Senior Compliance Engineer
Xyratex Product Compliance Lab.
Havant, Hants, U.K.
tel: 02392 496444
fax: 02392 496014
[email protected]
From: Ned Devine [mailto:[email protected]]
Sent: 16 April 2003 14:11
To: IEEE EMC/Product Safety (IEEE, EMC/Product Safety)
Subject: Thermocouple glue
Hi,
In the past I have used Henkel Sicomet 77 to adhere thermocouples. I
just tried to reorder some and was told it has been discontinued.
Does anyone have a recommendation on a replacement?
Thanks
Ned Devine
Entela, Inc.
3033 Madison Ave. SE
Grand Rapids, MI 49548
Phone: 616 248 9671
Fax: 616 574 9752
e-mail: [email protected]
www.entela.com
Entela, Inc. A Certified Woman Owned Business
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
This message is from the IEEE EMC Society Product Safety
Technical Committee emc-pstc discussion list.
Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/
To cancel your subscription, send mail to:
[email protected]
with the single line:
unsubscribe emc-pstc
For help, send mail to the list administrators:
Ron Pickard: [email protected]
Dave Heald: [email protected]
For policy questions, send mail to:
Richard Nute: [email protected]
Jim Bacher: [email protected]
Archive is being moved, we will announce when it is back on-line.
All emc-pstc postings are archived and searchable on the web at:
http://www.ieeecommunities.org/emc-pstc
